Gimme 5 years
Re: Gimme 5 years
yeah, well the black bits are black and the grey bits are montana grey - with the door closed the shed is pretty dingy and the yellow of the lights doesn't help...probably a good day for the hardware shop...I'll see what I can do
Re: Gimme 5 years
bit better with some white light fluros
Re: Gimme 5 years
another delivery - it's been good shopping weather
Re: Gimme 5 years
Under the white fluro that looks like the same as what mine were from factory, ute and van.
Are the shocks heavy duty gas Monroe Wiley?
FB ute fixer upper, EK van on rotisserie
Are the shocks heavy duty gas Monroe Wiley?
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Gimme 5 years
Hi Clay, the shocks are Gabriel Guardian gas shocks - good price at Superspares. Patrick
Re: Gimme 5 years
I see the bastard file coming out to fit the fronts. Good brand going back Gabriel.
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Gimme 5 years
I don't use paint stripper much - but for wheels - yep...then some paint
- Attachments
-
- wheels.jpg (64.12 KiB) Viewed 475 times
-
- Posts: 2047
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: Gimme 5 years
Neat Patrick
They look red and fast
Regards
Stephen
They look red and fast


Regards
Stephen
A day in the shed beats a day at work!
Re: Gimme 5 years
Now you’re tempting me paddy
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Gimme 5 years
Yeah, those two wheels came from a fella in Sydney who happened to be coming this way...they cleaned up well.
Today, I put some air in the tyre of a wheel that I had previously painted and had sitting outside. It started bubbling water around the valve and bead...hmmm...got the tyre taken off - it's wet in there and has been rusting. I tidied it up but not sure it'll be used, if I come up with enough other better ones.
Now, I'll take the wheels off the ute one at a time and decide (at least I know they hold air - though two have tubes). I put my other painted wheel (the HR one) on the ute, so I could paint up another EK one.
Patrick
The previous owner must have been environmentally conscious
Today, I put some air in the tyre of a wheel that I had previously painted and had sitting outside. It started bubbling water around the valve and bead...hmmm...got the tyre taken off - it's wet in there and has been rusting. I tidied it up but not sure it'll be used, if I come up with enough other better ones.
Now, I'll take the wheels off the ute one at a time and decide (at least I know they hold air - though two have tubes). I put my other painted wheel (the HR one) on the ute, so I could paint up another EK one.
Patrick
The previous owner must have been environmentally conscious

-
- Posts: 2047
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: Gimme 5 years
Good old retreads hey..... with a name like “Rodgers Retreads” I’m sure he was an honest bloke? 

A day in the shed beats a day at work!
Re: Gimme 5 years
I started stripping another wheel but then the weather turned nasty (and my workspace isn't hail-proof)
...but what can you do? the clothesline is where I hang out
boom boom
...but what can you do? the clothesline is where I hang out
boom boom
Re: Gimme 5 years
drilled some extra holes and sprayed fish oil everywhere that's been welded (front, driver's side, rear) - another job that you don't see - unless you look on the concrete (and my clothes)
Re: Gimme 5 years
gave the petrol tank a bit of a cleanup
could hear something loose inside ... so I shook these out - home made fuel catalyst?
could hear something loose inside ... so I shook these out - home made fuel catalyst?