LS1EK

Post photos of your pride and joy, or updates on your rebuild!

Moderators: reidy, Blacky

Post Reply
TAZ
Posts: 345
Joined: Wed Sep 23, 2015 9:32 pm
State: TAS
Location: hobart

Re: LS1EK

Post by TAZ »

Exhaust is all in place, just need to fab up some mounts and then finish welding it together.
Attachments
IMG_7425.jpeg
IMG_7425.jpeg (1.51 MiB) Viewed 380 times
IMG_7412.jpeg
IMG_7412.jpeg (1.94 MiB) Viewed 380 times
IMG_7409.jpeg
IMG_7409.jpeg (2.54 MiB) Viewed 380 times
IMG_7405.jpeg
IMG_7405.jpeg (1.92 MiB) Viewed 380 times
Top
60Special
Posts: 298
Joined: Wed Sep 21, 2011 3:07 pm
State: WA
Location: Perth, WA

Re: LS1EK

Post by 60Special »

Looks like a German virgin I used to know, Schneizentite.
Looking good but make sure you don’t get too much heat near that airbag.
Top
Blacky
Posts: 12798
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: LS1EK

Post by Blacky »

A LOT of work gone into that :thumbsup: 8)
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Top
TAZ
Posts: 345
Joined: Wed Sep 23, 2015 9:32 pm
State: TAS
Location: hobart

Re: LS1EK

Post by TAZ »

60Special wrote: ↑Wed Oct 23, 2024 9:34 am Looks like a German virgin I used to know, Schneizentite.
Looking good but make sure you don’t get too much heat near that airbag.
It is the angle of the photo as there is at least 60 mm of clearance between the exhaust and airbag.
Top
User avatar
Errol62
Posts: 10270
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: LS1EK

Post by Errol62 »

Tidy work there feller.


FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
Top
TAZ
Posts: 345
Joined: Wed Sep 23, 2015 9:32 pm
State: TAS
Location: hobart

Re: LS1EK

Post by TAZ »

For something different I thought I would start running some brake lines.
Attachments
IMG_7478.jpeg
IMG_7478.jpeg (1.79 MiB) Viewed 267 times
IMG_7536.jpeg
IMG_7536.jpeg (2.26 MiB) Viewed 267 times
Top
TAZ
Posts: 345
Joined: Wed Sep 23, 2015 9:32 pm
State: TAS
Location: hobart

Re: LS1EK

Post by TAZ »

Bit more exhaust spam, I added in two more v-bands as I will be getting the exhaust ceramic coated and it was too long to go in their tank.

I also started fabricating up the brackets to mount the car on the rotisserie for the last time. Yep time to finish up the up the underside and engine bay and lay some paint down.

I have included a picture of the tacking clamp I made for tacking exhaust together. It allows you to tack the joint with the clamp holding it in place. They are tube mounting clamps made from stainless. You can buy them online, I will also use them for mounting the exhaust.
Attachments
IMG_7765.jpeg
IMG_7765.jpeg (2.6 MiB) Viewed 148 times
IMG_7764.jpeg
IMG_7764.jpeg (2.72 MiB) Viewed 148 times
IMG_7763.jpeg
IMG_7763.jpeg (1.58 MiB) Viewed 148 times
IMG_7761.jpeg
IMG_7761.jpeg (1.98 MiB) Viewed 148 times
Top
Blacky
Posts: 12798
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: LS1EK

Post by Blacky »

Nice work on the exhaust, you can come over here and sort mine out if ya want :thumbsup:
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Top
User avatar
FireKraka
Posts: 2423
Joined: Fri Jan 24, 2014 11:12 am
State: WA
Location: Serpentine, WA

Re: LS1EK

Post by FireKraka »

I reckon we could book Taz in for quite a few Blacky :lol: :lol: :lol:
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Top
Blacky
Posts: 12798
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: LS1EK

Post by Blacky »

FireKraka wrote: ↑Mon Nov 11, 2024 1:21 pm I reckon we could book Taz in for quite a few Blacky :lol: :lol: :lol:
We could keep him busy for quite a while ............... 8)
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Top
User avatar
Harv
Posts: 5226
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: LS1EK

Post by Harv »

Blacky wrote: ↑Mon Nov 11, 2024 5:21 pm
FireKraka wrote: ↑Mon Nov 11, 2024 1:21 pm I reckon we could book Taz in for quite a few Blacky :lol: :lol: :lol:
We could keep him busy for quite a while ............... 8)
I wonder how many cases of Boags I would need to supply if he started work at one end of my driveway and worked his way down? :lol:

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Top
Blacky
Posts: 12798
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: LS1EK

Post by Blacky »

Harv wrote: ↑Tue Nov 12, 2024 7:56 am
Blacky wrote: ↑Mon Nov 11, 2024 5:21 pm
FireKraka wrote: ↑Mon Nov 11, 2024 1:21 pm I reckon we could book Taz in for quite a few Blacky :lol: :lol: :lol:
We could keep him busy for quite a while ............... 8)
I wonder how many cases of Boags I would need to supply if he started work at one end of my driveway and worked his way down? :lol:

Cheers,
Harv
I would say zero - He is from the south and I would assume has never had a can of Boags in his life :lol:
Cascade however may be a different story ........ :D
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Top
Post Reply

Return to “My FB EK”