Rusty EK,s Ute

Post photos of your pride and joy, or updates on your rebuild!

Moderators: reidy, Blacky

User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Here you go Fatboy , bit hard to get up under dash and get a decent pic sorry .

The bracket that the gemini booster bolts to fits neatly inside the ek pedal box , so all I did was to cut it off and weld the bracket on the inside so that the brake rod was the right length to join up to the pedal that I used , this in turn made the pedal box assembly about 6mm longer than original .

So I cut off the end that bolts to the dash 6mm and welded up the holes and redrilled to suit , then I just modified the brake pedal to sit in the desired location .

Hope that makes sense?


Image
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Made it back out of the shed today , working brakes and handbrake :D ,thanks to Trev for the last slide pin brakes work great , looks like am going to have to do a flare job on it :x , didnt want too

Have finished off the tub , and blocked back most of the car again and spot puttied a few more spots , plan for the weekend is to finish blocking all the curvy bits , and do a flare job now , and put the last coat of primer on it .

Hopefully another week or so and we will look at throwing some colour on it ,wont be perfect , but will be tidy :thumbsup:

Image
Image
Mick
Posts: 4144
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: Rusty EK,s Ute

Post by Mick »

what about getting the rims made smaller as in not as wide, if they are 7's now get them put in a 6" rim and even change the offset a bit if you have the room to spare inwards
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

No money left this week for wheel changes Mick , just paid my engineer and for all my new rubbers :( , think they call it broke :lol: , will have to be a hammer and dolly massage , much cheaper :P
Mick
Posts: 4144
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: Rusty EK,s Ute

Post by Mick »

Rusty EK wrote: think they call it broke :lol:
nup i call that normal :( :D
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Getting close , got some more primer on to it and found a few more little spots to fix up .

Still have the stone tray to repair and a bit more work on the second bonnet to do , but should be close to ready this week :D

Image
Image
Image
User avatar
holdenutechick
Posts: 361
Joined: Sun Aug 21, 2011 3:38 pm
State: NSW
Location: Finley NSW
Contact:

Re: Rusty EK,s Ute

Post by holdenutechick »

Looking like some pretty nice work there Rusty keep up he good work :thumbsup:
~Allison
My project:
'60 Holden FB ute

Other family projects:
Mum's '54 FJ Holden Special Sedan
Farm Bedford grain truck
Trev
Posts: 7897
Joined: Thu Apr 15, 2004 6:43 pm
State: NOT ENTERED
Location: Wonthaggi

Re: Rusty EK,s Ute

Post by Trev »

Thats a neat flare job :thumbsup: .
[img]http://i47.photobucket.com/albums/f177/trevwood/WOOFTOsmall.jpg[/img]
Woofto Car Club Member No3
zl296
Posts: 427
Joined: Fri Sep 02, 2011 6:14 pm
State: NOT ENTERED
Location: gippsland

Re: Rusty EK,s Ute

Post by zl296 »

eeexxxxtra cab..
looks very 2011.. :thumbsup:
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Thanks guys
Borrowed a new carby off a mate tonight , WOW , what a differance , just could not get mine to run right , only trouble is now I thought the gearbox was slipping , nup its wheelspin , he, he :P , she is a lively little thing :D
Mick Jagger
Posts: 3428
Joined: Mon Dec 08, 2008 12:48 pm
State: NOT ENTERED
Location: Brisbane

Re: Rusty EK,s Ute

Post by Mick Jagger »

8)
bigger tyres
kmawic
fbtim
Posts: 155
Joined: Sat Jan 08, 2011 10:18 am
State: NOT ENTERED
Location: Melbourne, Vic

Re: Rusty EK,s Ute

Post by fbtim »

wheel spin with steering and brakes! good one.
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

And no tree stumps , got to be happy :lol: , have put 20 litres of fuel through it and havent been out the drive yet :shock:
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Treated the old girl to a day out last weekend , there was a fundraiser car show on to raise money for upkeep of our local hall , thought I would take her out to boost the numbers , but there was a pretty good turnout considering the forcast , rain held off for most of the day and they got somewhere around 100 cars turn up .
This is only the second year they have held it , from about 20 cars last year , looks good for continued growth in years to come .

Chucked a few bits back on her to make her look a bit more presentable :) , got quite a lot of interest during the day .

Sorry not many photos , spent too much time talking :esmile:
Image
Image
Image
Image
Image
Image
Image
Image
User avatar
russo
Posts: 121
Joined: Fri Aug 20, 2010 7:20 pm
State: NOT ENTERED
Location: melbourne

Re: Rusty EK,s Ute

Post by russo »

that last one is definitly tasmanian :shock: :shock: :) :)
Russo
Post Reply