Rusty EK,s Ute
- BILLY BLACKARROW
- Posts: 1065
- Joined: Thu Aug 21, 2008 9:22 pm
- State: NSW
- Location: NEWCASTLE MACQUARIE HILLS
Re: Rusty EK,s Ute
Hi Ya
When you have the radiator out next time could you take pic to show me what you did with the rails,haven't done this yet but think I will have to, to get it low enough I'm using a HQ radiator and the filler is on the top I can move that but don't think I will still have room
Thanks BILLY
When you have the radiator out next time could you take pic to show me what you did with the rails,haven't done this yet but think I will have to, to get it low enough I'm using a HQ radiator and the filler is on the top I can move that but don't think I will still have room
Thanks BILLY
BILLY BLACKARROW
MY Father always said do the hard part first --because when you are OVER IT you only have the easy part left to do THINGS I HAVE TRIED TO LIVE BY
MY Father always said do the hard part first --because when you are OVER IT you only have the easy part left to do THINGS I HAVE TRIED TO LIVE BY
Re: Rusty EK,s Ute
Thanks for the comments guys
G,day Billy , cut the rails down to the join , the passenger side I had to cut back far enough as to allow the bottom hose to go on and come around to the motor , cant remember where the hose comes out on the HQ ones , you may or may not need to do this .
The drivers side I just cut back about 50mm for the radiator , at this level the bonnet closes with about 10mm to spare , have this photo , will show you the passenger side cut out, hope it helps.
Can take some more for you ,when it comes back out , just let me know.
G,day Billy , cut the rails down to the join , the passenger side I had to cut back far enough as to allow the bottom hose to go on and come around to the motor , cant remember where the hose comes out on the HQ ones , you may or may not need to do this .
The drivers side I just cut back about 50mm for the radiator , at this level the bonnet closes with about 10mm to spare , have this photo , will show you the passenger side cut out, hope it helps.
Can take some more for you ,when it comes back out , just let me know.
- BILLY BLACKARROW
- Posts: 1065
- Joined: Thu Aug 21, 2008 9:22 pm
- State: NSW
- Location: NEWCASTLE MACQUARIE HILLS
Re: Rusty EK,s Ute
That's what I thought you meant but wasn't Shaw
Thanks BILLY
Thanks BILLY
BILLY BLACKARROW
MY Father always said do the hard part first --because when you are OVER IT you only have the easy part left to do THINGS I HAVE TRIED TO LIVE BY
MY Father always said do the hard part first --because when you are OVER IT you only have the easy part left to do THINGS I HAVE TRIED TO LIVE BY
Re: Rusty EK,s Ute
G,day All , have been busy chasing the rust demon again this weekend , have started on the passenger side now .
Made a new sill and fitted it , and had to replace nearly half this side , well it felt like it anyway but have made some progress , bloody cold here today ,so have finished for the day .
Still got a bit more welding and grinding to do but the panel was starting to get a bit warm and didn,t want to buckle it .
Hope all you guys going to the Nats have a great time , and we want plenty of pictures from you all.
Any way here is some progress shots.
Made a new sill and fitted it , and had to replace nearly half this side , well it felt like it anyway but have made some progress , bloody cold here today ,so have finished for the day .
Still got a bit more welding and grinding to do but the panel was starting to get a bit warm and didn,t want to buckle it .
Hope all you guys going to the Nats have a great time , and we want plenty of pictures from you all.
Any way here is some progress shots.
Re: Rusty EK,s Ute
after seeing this i don't think there is reason for anybody to ever scrap another car cause it's too far gone
Re: Rusty EK,s Ute
Hey Ratbox , on the other hand I was sitting there with a beer in my hand looking at it ,and thinking what the hell am I doing , if I had a car I didnt have to cut all this rust out , I could of been cruising in it by now , but at least I know when it is finished there will be no rust popping out in a couple of years, its all new bloody steel
Re: Rusty EK,s Ute
G,day All
Here is the update on the old girl , have just about finished the passenger side on the body now , little bit to do at the bottom of the door corners ,but am going to leave this till i get it back on the roaster, am sick of crawling around on my knees.
Got it straightened out , back to bare metal and a coat of etch primer on to it.
Moved back on to the chassis now for a bit of a change , finished welding the fish plates and gussets on to it , getting ready to start putting a new floor back into the old girl
Started putting the tunnel back in , it is going to be painted the same colour as the outside of the ute to make it a bit of a feature, with carpet running down the sides .
Next Job is to make up some tubs over the wheels and start filling in the holes , thats all for now .
Here is the update on the old girl , have just about finished the passenger side on the body now , little bit to do at the bottom of the door corners ,but am going to leave this till i get it back on the roaster, am sick of crawling around on my knees.
Got it straightened out , back to bare metal and a coat of etch primer on to it.
Moved back on to the chassis now for a bit of a change , finished welding the fish plates and gussets on to it , getting ready to start putting a new floor back into the old girl
Started putting the tunnel back in , it is going to be painted the same colour as the outside of the ute to make it a bit of a feature, with carpet running down the sides .
Next Job is to make up some tubs over the wheels and start filling in the holes , thats all for now .
Re: Rusty EK,s Ute
ITS SHMEAGAIN Grate work rusty i bet your brain hurts
Re: Rusty EK,s Ute
G,day ITS SMEAGAIN , Yes brain hurts , some of my mates reckon I dont have one , you have to keep thinking three steps ahead so the next piece will fit , getting a bit easier now , when I was building the chassis it really hurt , trying to get it so the ride height will be right and the wheels sat in the right position , how you going with yours you must know how it feels
Re: Rusty EK,s Ute
ITS SMEAGAIN Mine is very basic compared to yours but it still keeps me tossing an terning at night
Re: Rusty EK,s Ute
G,day All
Here is the latest update , been working on getting the tubs made and in , is starting to come back together , is even starting to look like a car again
Got the panel made between the ute tub and cab and tacked in , even fitted a new interior light
Made up an area to fit the spare wheel and jack etc in the back and started making the infill panels around the outside
Back on to chasing the rust demon this week , am going to try and sort out the front guards and bonnet
Need to replace the front peaks over the headlights and am thinking of extending them and the rear tail lights as well , taped up what I was thinking of doing , would like some input ,what do you guys think , good idea or not ?????
Bit bodgy on the taping , but you get the general idea.
Cheers
Here is the latest update , been working on getting the tubs made and in , is starting to come back together , is even starting to look like a car again
Got the panel made between the ute tub and cab and tacked in , even fitted a new interior light
Made up an area to fit the spare wheel and jack etc in the back and started making the infill panels around the outside
Back on to chasing the rust demon this week , am going to try and sort out the front guards and bonnet
Need to replace the front peaks over the headlights and am thinking of extending them and the rear tail lights as well , taped up what I was thinking of doing , would like some input ,what do you guys think , good idea or not ?????
Bit bodgy on the taping , but you get the general idea.
Cheers
Re: Rusty EK,s Ute
Loving you work so far dude, still not sold on the extra cab bit, but i think in the end i probably will be but still the work is awesome!
all for peaking the front, the rears though look wierd!
Cheers
Nathan
all for peaking the front, the rears though look wierd!
Cheers
Nathan
FB/EK Holden Car Club of W.A. Inc
Foundation Member
Foundation Member
Re: Rusty EK,s Ute
not sure i like the interior light much
peaked headlight-yup!
taillights....dunno. maybe if you extend the sheetmetal underneath it to match up witht he taillight
peaked headlight-yup!
taillights....dunno. maybe if you extend the sheetmetal underneath it to match up witht he taillight
'The best engine in the world is a vagina. It can be started with only one finger. It is self-lubricating. It takes any size piston. And it changes it's own oil every four weeks. It is a pity that the management system is so f*$king temperamental.'
Re: Rusty EK,s Ute
Here's a rough idea of how it would look-bumper would need to be moved out as well though, unless you moved the tailgate (again ) not a bad way to make some extra space in the tub though
'The best engine in the world is a vagina. It can be started with only one finger. It is self-lubricating. It takes any size piston. And it changes it's own oil every four weeks. It is a pity that the management system is so f*$king temperamental.'
Re: Rusty EK,s Ute
Nomad, Not sure about the tail lights myself either , was trying to make them like a little fin?
Ek jimmy , Going to have to get me photoshop , easy to see what things would look like .
Ek jimmy , Going to have to get me photoshop , easy to see what things would look like .