Post deleted

Jasper · Post by **Jasper** » Thu Jul 12, 2007 1:59 pm

Post deleted.

Trev · Post by **Trev** » Thu Jul 12, 2007 4:27 pm

Hi Jasper, you can buy them from Autobarn or Repco, any shop like that.
Contact Greg at Holdies Auto Salvage - 22 Graham Rd Westall VIC 3169 Ph 9546 9350,
Trev

.

Jasper · Post by **Jasper** » Fri Jul 13, 2007 10:58 am

Post deleted.

Trev · Post by **Trev** » Fri Jul 13, 2007 12:01 pm

Thanks for the phone no correction, Trev

FB search · Post by **FB search** » Wed Jul 18, 2007 1:15 pm

"He can fit the belts without drilling that ugly hole through the B pillar on the ute."

Cool!
Is it possible to do this in a sedan also? No frankenstien bolts?

Trev · Post by **Trev** » Wed Jul 18, 2007 5:38 pm

Yes of coarse you can, Trev

.

smooth · Post by **smooth** » Wed Jul 18, 2007 5:51 pm

Yes, it's possible. they cut a "U" shape and fold down a section of the pillar sheet metal, weld in a thick metal plate with either a nut welded to it of if the plate is thick enough that tap a thread straight into it. Weld it all up and the jobs done bar the paint.

Regards, Smooth

reddo · Post by **reddo** » Thu Jul 19, 2007 2:35 pm

Sounds like a neat job.
Ok now that we have that sorted how do you fit retractable belts in a ute ( or a sedan for that matter) ??
Where does the retractor reel sit so it doesnt foul on the seat when the seat is pushed back.
I am lead to believe you have to fit retractable belts and a few other updates like heater/ demister, disc brake front, etc when repowering with a 186 etc. in NSW.
Even if you dont have to fit them it would be good to be able to get into the ute and not have to untwist and wrestle the lap sash belts like a floppy snake every time you go to buckle up.

Reddo

reddo · Post by **reddo** » Thu Jul 19, 2007 2:56 pm

WHOA..

dunno what happened there folks. had a play with trying to get an avatar up and hit the big time.

Hope one of you adminstrator types can sort it out.....
Hmmmm i have heard of getting to bathurst early but stickin ya caravan on the starting grid in pole position is a good way of getting close up and personal with other holden drivers....
Reddo

Trev · Post by **Trev** » Thu Jul 19, 2007 4:28 pm

Sorry reddo, try again, heaps smaller next time

,
Trev

smooth · Post by **smooth** » Thu Jul 19, 2007 4:37 pm

Couldn't you fix it for him Trev?

Just save the photo and resize it to 200 pixels wide. Upload to Photobucket and your in business.

If it's all to hard send me the photo and I'll fix it.

Regards, Smooth

Trev · Post by **Trev** » Thu Jul 19, 2007 4:41 pm

If I did it for him hows he going to learn to do it himself? It took me a couple of tries but now it's no problem. I'm sure reddo would like to know how to do it himself

,
Trev

.

smooth · Post by **smooth** » Thu Jul 19, 2007 4:45 pm

Fair enough!

Regards, Smooth

reddo · Post by **reddo** » Thu Jul 19, 2007 4:58 pm

No wucker fellas.
all i did was create a url link from the photo in photobucket and transfered into the avatarbox in my profile.
Didnt think it would go jumbo size and stuff the whole thread up.

Thanks for untangling the mess. will have a coupla longnecks and mellow out B4 having another go at it.
Too right he's a big boy now and i aint gunna let nunna this new fangle gizmo lectronics beat a 53 year old drunk... now get outta my way and lemme have anoither go.

Reddo

Trev · Post by **Trev** » Thu Jul 19, 2007 5:07 pm

Just resize them in photobucket and try again, Trev