Page 1 of 1
Grey Motor .010" OS Pistons and rings
Posted: Thu Oct 15, 2015 4:22 pm
by Craig Allardyce
As it says, I'm on the hunt for a set of .010" OS Pistons and rings. Have been through the usual with suppliers. Any leads would be appreciated.
Thanks in advance.
Re: Grey Motor .010" OS Pistons and rings
Posted: Thu Oct 15, 2015 8:34 pm
by yaapeet30
Hi Craig,
Not sure if this is what you are after.
http://www.ebay.com.au/itm/HOLDEN-FE-FC ... 2ca23bbf1e
It is only pistons. They are Repco Pistons. I have just had a look in my Repco parts book and I can't find any reference to them. The description doesn't say if they are for a grey or a red.
Cheers
Rod
Re: Grey Motor .010" OS Pistons and rings
Posted: Thu Oct 15, 2015 8:39 pm
by Craig Allardyce
Thanks Rod, yep checked that one out. They are in fact 179 pistons - not Grey Motor. The lack of gudgeon pin retainers raised my suspicion. ACL Catalogue confirmed 2087 as 179. 90mm diameter is 3 1/2" which would be into the water jackets. Man you have to be so careful with Ebay.
Re: Grey Motor .010" OS Pistons and rings
Posted: Fri Oct 16, 2015 10:34 am
by fingers
Hey Graig ....Nason in Dandy had 3 and 1/8 earlier in the year so I guess they still have them .....hope that helps ....Fingers