Page 65 of 77

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sat Sep 29, 2012 6:43 pm
by the rocket
hi steve

details are...body EK/225-213M
trim 712-965
paint 585-4582
top 585-0246

I'll have to get the engine number, it's not in the car but i think it's not the original because the front end is fb.

Rick

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Fri Oct 26, 2012 10:29 am
by WayneXG95
WayneXG95 wrote:Time for an update Steve... :thumbsup:
Bump.... :D

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Tue Nov 06, 2012 7:31 pm
by Dr Terry
RobinGi wrote:Thanks for that, i does look like someone was testing the No. 3 stamp to see if it works (or half of "666" spawn of satan)
but if anyone know what the 333 reference is i would apprecieate.
Hi Guys.

I couldn't resist commenting on the 333 stamp on the early FB van.

It could be a continuation of the option code 333 from the FE/FC days.

FE/FC panel van upper tailgates did not get glass as standard, they had a plain steel body-coloured panel fitted instead. RPO 333 was the option number for glass to be fitted. It must have been very popular, in my lifetime I've only seen a handful of these vans with the steel panel. Nearly all surviving FE/FC vans have a glass upper tailgate & 333 on the body plate. As a matter of fact the earlier body plate had provision for the RPO to be stamped but the later FCs just had it stamped in the lower RH corner of the plate, just like the FB in the picture.

I'm not sure if GM-H ever intended the steel/glass upper tailgate thing to continue into FB with RPO 333 still available. But it is possible as this car is a very early p/van.

Dr Terry

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Tue Dec 04, 2012 9:27 pm
by Marty K Bird
Here are my rigs details

Body EK225/8956S
Trim 719-1023
Paint 585-4584
Engine B239384
Frame EK24395S

Has original boot mat stamped 17 Aug 1961

Be interested to know if the engine might be the original item.... i think its in the range but anyway to tell?

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Fri Dec 07, 2012 10:19 pm
by fb delivery
pic1129178.jpg
pic1129178.jpg (120.76 KiB) Viewed 2147 times
pic1129176.jpg
pic1129176.jpg (77.18 KiB) Viewed 2147 times
pic1129177.jpg
pic1129177.jpg (66.01 KiB) Viewed 2147 times
pic1129179.jpg
pic1129179.jpg (129.75 KiB) Viewed 2147 times

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Jan 13, 2013 2:35 pm
by anotherfbnewbie
No vehicle identity plate, purchased from silent auction at old police impound at novar gardens SA
Last rego was in VIC over 20 years ago.

Chassis # FB 4860M
Engine # B2000124
Image

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Jan 13, 2013 2:59 pm
by anotherfbnewbie
Will do Tim,
Its down near the dipstick right?
Also would not be surprised if engine has been changed, given it came from a police impound, no id plate, and overspray on rear window.
Would not be surprised if it's not even original colour.

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Jan 13, 2013 3:10 pm
by anotherfbnewbie
Sorry typed too many zero's
Its B200124

23,000 miles

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Jan 13, 2013 11:34 pm
by MeFB
Very sad looking EK shell on eBay.

Image

Can you chuck this poor old girl on the list please Tim?

:arrow: :D

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Jan 27, 2013 9:36 pm
by oldskool
Can anyone help with some history on this EK Special? I purchased it in May 2012 from Pakenham and it featured in the forum Re: GMH Body Id Plate, Chassis & engine No ..... Please post. The following links show the pictures posted.

http://www.fbekholden.com/forum/downloa ... hp?id=1112
http://www.fbekholden.com/forum/downloa ... hp?id=1113
http://www.fbekholden.com/forum/downloa ... hp?id=1114

The car came from NSW, owned by Leon Newson, Rego Number BI 72 PL. It went to Pakenham and is now in Churchill, Vic.

Body EK225H 10707M
Trim 680 1022 - Viscount and Zenith Grey + SGB
Paint 585-0244 - Shalimar Blue
Top 585-0246 - Snowcrest White
Chasis/ Frame EK36655S

Any information on its history would be greatly appreciated.

Cheers, oldskool

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Sun Jan 27, 2013 9:48 pm
by oldskool
Can anyone help with some history on this EK Special? This is my second post due to me making an error in the first post.

My car came from NSW, owned by Leon Newson, Rego Number BI 72 PL. It went to Pakenham and is now in Churchill, Vic.

Body EK225H 10707M
Trim 680 1022 - Viscount and Zenith Grey + SGB
Paint 585-0244 - Shalimar Blue
Top 585-0246 - Snowcrest White
Chasis/ Frame EK36655S

I purchased it in May 2012 and it featured in the forum Re: GMH Body Id Plate, Chassis & engine No ..... Please post. The following links show the pictures posted.

http://www.fbekholden.com/forum/downloa ... hp?id=1112
http://www.fbekholden.com/forum/downloa ... hp?id=1113

Oooops! I had a third link 1114 in my first post- this is not my car - I was too quick on the trigger - mine looks like this car but without spats and aerial. If this is yours EKfanPaul2, my apologies for the mistake.

Any information on its history would be greatly appreciated.

Cheers, oldskool

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Mon Jan 28, 2013 11:14 am
by vintageholden
BLACK EK UTE
RED INTERIOR
BODY EK2106-3637A
PAINT.585-9892
TRIM.528-983

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Wed Feb 27, 2013 12:12 am
by ekwags62
Went and checked out a wagon on Perth Gumtree today down past Mandurah. No pics because potobucket is a heap sh@# now they changed it. http://www.gumtree.com.au/s-ad/wannanup ... 1014971334
Fairly much original with a few touch ups on it. Rust in the usual spots bottom of doors, lower rear 1/4s, front passenger chassis out rigger repaired, driver floor patched rest of floor has pin holes scattered thru out, rust hole on underside of head light brow, Cills look solid but cant tell for sure. Subframe rear brace needs major work to the drivers side. Complete car partly dismantled
One for your list of Perth cars MeFB

EK229-3332A
741-1051
585-9931
585-0246

Subframe 6631P from what I can remember.

Mick

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Mon Apr 29, 2013 12:21 pm
by WayneXG95
Couple for ya Tim

EK having oil leaks fixed.

Image

Image

I need to get the last 2 numbers, I didn't realise the wire was there till I got home..bugger

Image

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Posted: Mon Apr 29, 2013 12:24 pm
by WayneXG95
I was at the auto electrican while he was rewiring Milkshake and this blue FB turned up
So we checked out each others cars.. 8)

Image

Image

Image

Cheers