GMH Body Id Plate, Chassis & engine No ..... Please post.

Includes sheet metal, rubbers, bumpers, badges and rust repairs.

Moderators: reidy, Blacky

User avatar
WayneXG95
Posts: 2565
Joined: Wed Sep 07, 2011 9:42 am
State: NSW
Location: Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by WayneXG95 »

Another for ya steve. Just brought this one, can't see it on the list
can ya ID the details for me please mate? :thumbsup:

http://www.fbekholden.com/forum/viewtop ... 11&t=15459

Image

Image


Cheers
Wayne Chambers
President
FB EK Holden Car Club of N.S.W
ekk*062
Posts: 2
Joined: Thu Jan 26, 2012 3:37 pm
State: NOT ENTERED
Location: FNQ

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by ekk*062 »

hi i just bought this ek,that has been posted on this site ,EK wedgewood Blue
EK-225-20847-A
Trim:739-966
Paint-585-0115
Top:585-0246
Chassis: EK-17721-B ,i am looking forward in doing her up she is very sound,i will post up the rebuild ,i have a question ? can anyone tell me the year it was built.
User avatar
WayneXG95
Posts: 2565
Joined: Wed Sep 07, 2011 9:42 am
State: NSW
Location: Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by WayneXG95 »

Bump..hint hint. :D
Wayne Chambers
President
FB EK Holden Car Club of N.S.W
GreyPride
Posts: 27
Joined: Thu Apr 23, 2009 10:20 am
State: NOT ENTERED
Location: Rural Victoria West of Bendigo

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by GreyPride »

I have looked at the numbers spreadsheets and cannot find details for either of my Vans = can someone check the colours for me

FB-2104-60-A
866-827 (trim)
256-960 (paint)

EK- 2104-4855-A
966-978 (trim)
585-0276 (paint)

The master parts book shows the trim codes are for Mephisto Red in the FB and Mephisto Red and Madison Grey in the EK, but cant find any refference to the paint?? The FB paint I am asuming is in Nitro - being 256???

Thanks
GP
62 Silverton Grey Utility with Matador Red and Mawson Grey interior!
User avatar
Glenhaych
Posts: 14
Joined: Wed Mar 19, 2008 8:48 am
State: NOT ENTERED
Location: Skennars Head NSW

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Glenhaych »

Hi Steve,
here are some photos of the ID plate, the dearlers plate in the engine bay, the inside of the service book with the original owners details and out of interest, the receipt for the "Lay Back Seat" which is still in the car. I bought the car in 2006 in Bellingen NSW where it had sat in a shed for 18 years.
Keep up the good work
cheers
Glen
Attachments
Lay Back Seat receipt
Lay Back Seat receipt
eklbs.jpg (65.09 KiB) Viewed 2682 times
Service book
Service book
eksb.jpg (82.7 KiB) Viewed 2682 times
Dealers plate
Dealers plate
ekdp.jpg (95.76 KiB) Viewed 2682 times
The car
The car
ekid.jpg (101.67 KiB) Viewed 2682 times
ID plate
ID plate
ek1.jpg (130.54 KiB) Viewed 2682 times
mr.jones
Posts: 93
Joined: Mon Sep 15, 2008 12:40 am
State: NOT ENTERED
Location: West Coast SA
Contact:

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by mr.jones »

GreyPride wrote: can someone check the colours for me
FB-2104-60-A
866-827 (trim) going to need you to have a look at the combination no and the paint code as 866 is an HD Premier combination, its not 366 is it which is Buckskin, paint code 9691
256-960 (paint)

EK- 2104-4855-A
966-978 (trim) all 900 combinations are fleet vehicles
585-0276 (paint) Scaffold Biscuit is the paint colour 8)

GP
Are they still in the original colours if they are Stevie J will be beating down your door shortly :D


Leroy

edit you have the trim codes correct and if you need a paint recipe for Scaffold I have one
GreyPride
Posts: 27
Joined: Thu Apr 23, 2009 10:20 am
State: NOT ENTERED
Location: Rural Victoria West of Bendigo

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by GreyPride »

Will double check the FB tags when I am next out at the farm Leroy, it was dark and dank trying to get them off the plate on that one!

both are original paint - or what is left of it! they are too far gone for even Mr Jackson to be interested in them -other than for statistical purposes, so will be chopping them up and making one out of the two, the EK has windows fitted - the FB is windowless, so just trying to see which shell will be the lucky "survivor" of the two.

many thanks for the heads up!
GP
62 Silverton Grey Utility with Matador Red and Mawson Grey interior!
resto
Posts: 27
Joined: Sat Dec 31, 2011 7:30 pm
State: NOT ENTERED
Location: Melbourne

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by resto »

The EK van certainly is unusual - Scaffold Biscuit colour was the fleet paint colour for Mills Scaffolds in SA. This would be a very rare colour van to find now.

Resto
User avatar
Aussie Bob
Posts: 8276
Joined: Wed Mar 14, 2007 12:28 am
State: NOT ENTERED
Location: Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Aussie Bob »

ekk*062 wrote:hi i just bought this ek,that has been posted on this site ,EK wedgewood Blue
EK-225-20847-A
Trim:739-966
Paint-585-0115
Top:585-0246
Chassis: EK-17721-B ,i am looking forward in doing her up she is very sound,i will post up the rebuild ,i have a question ? can anyone tell me the year it was built.
Hi ekk-062

Can you please clarify if the Body number is 20847-A ....or 20847-S ? I am yet to find a 225 Adelaide build body in the 8,000's or above.

Thanks,

Steve
User avatar
Bert
Posts: 7
Joined: Fri Feb 17, 2012 10:51 pm
State: NOT ENTERED
Location: Melbourne

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Bert »

Hi All, i'm just new to this blog (as of yesterday) and i have just purchased my first EK 3 days ago. I was wondering if anyone could help me with the colours of the car and trim as i'm not sure what the original paint and trim look like.
The codes are: Trim 671-969, Paint 585-0233.
Cheers,
Bert
Trev
Posts: 7897
Joined: Thu Apr 15, 2004 6:43 pm
State: NOT ENTERED
Location: Wonthaggi

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Trev »

Welcome Bert, the paint on you tag is Alamo Beige.

Which can be found here http://www.fbekholden.com/forum/viewtop ... f=23&t=929 :thumbsup:
[img]http://i47.photobucket.com/albums/f177/trevwood/WOOFTOsmall.jpg[/img]
Woofto Car Club Member No3
mr.jones
Posts: 93
Joined: Mon Sep 15, 2008 12:40 am
State: NOT ENTERED
Location: West Coast SA
Contact:

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by mr.jones »

Bert wrote:Hi All, i'm just new to this blog (as of yesterday) and i have just purchased my first EK 3 days ago. I was wondering if anyone could help me with the colours of the car and trim as i'm not sure what the original paint and trim look like.
The codes are: Trim 671-969, Paint 585-0233.
Cheers,
Bert
671 is Alamo Beige w/ a Snowcrest White roof, there should be another paint code on your tag 585-0246
969 is http://gallery.oldholden.com/Mr_Jones/F ... onora+Tan/

Welcome Bert, any questions you have about your car the helpful boys & girls here will be happy to answer :)
resto
Posts: 27
Joined: Sat Dec 31, 2011 7:30 pm
State: NOT ENTERED
Location: Melbourne

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by resto »

Here are 6 plates from cars wrecked at Dinkum Autos over the years
EK 225 13522 S
676 964
585 0240
PO 478 A
585 0246

EK 225M 22739 M
739 966
585 0115
585 0246

EK 225 H 18212 M
739 1022
585 0115
585 0246

FB 219 501 M
365 812
256 9690

FB 229 6105 M
604 821
585 9900
585 9891
585 9900

FB 225 5909 M
324 888
253 9368
256 2295
253 9368

Resto
User avatar
Bert
Posts: 7
Joined: Fri Feb 17, 2012 10:51 pm
State: NOT ENTERED
Location: Melbourne

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Bert »

Thanks everyone for your help. My interior looks original but the old sedan must have had a respray as it is red now with the snowcrest white roof. Can anyone recommend somewhere in melbourne where i can get the front bucket seat re-upholstered as it's got quite a big tear in it.
Once again, cheers.
User avatar
WayneXG95
Posts: 2565
Joined: Wed Sep 07, 2011 9:42 am
State: NSW
Location: Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by WayneXG95 »

Hi Bert and welcome mate.
Show us your car, post a thread with pics in the link below... :D
And join the happy group with bottomless pockets... :mrgreen:


http://www.fbekholden.com/forum/viewforum.php?f=11
Wayne Chambers
President
FB EK Holden Car Club of N.S.W
Post Reply