Posted: Thu Nov 12, 2009 9:31 pm
I just ate grapes for dinner,2 serves
I haven't eaten dinner yet.
I envy your welding skills very much.
Page 24 of 105
Posted: Thu Nov 12, 2009 9:50 pm
Posted: Thu Nov 12, 2009 10:36 pm
Lookin good. Nice H bolt, a pair are hard to find.
Posted: Thu Nov 12, 2009 11:22 pm
Now that is one shiny chunk of steel !
What did you use on the bonnet?
Dave Mac
What did you use on the bonnet?
Dave Mac
Posted: Fri Nov 13, 2009 6:24 am
Yeah,I used a 5 inch angle grinder with a Strip it disc (Josco Brumby) available from Bunnings.
Ive stripped back a lot of cars but SWEAR by this one ,one disc has done the whole roof and bonnet cost $18 each but well worth it,gets rid of the tiniest surface rust just keep it moving as to not warp the panel
Ive stripped back a lot of cars but SWEAR by this one ,one disc has done the whole roof and bonnet cost $18 each but well worth it,gets rid of the tiniest surface rust just keep it moving as to not warp the panel
Posted: Fri Nov 13, 2009 7:37 pm
in my best singing voice hh hhm,,Oh what a night late December back in sixty three my owner left me here for all to see I remember what a night 
breads on its way
breads on its way
Posted: Fri Nov 13, 2009 8:25 pm
are you getting that towed home 
or is it like most bread vans (if it was) rusted to death
or is it like most bread vans (if it was) rusted to death Posted: Sun Nov 15, 2009 8:22 am
Nah they can keep the van a bit to far gone for me,a few more pics,primed the bonnet,guard next,one panel at a time
Quite an uninteresting post
Quite an uninteresting post
Posted: Sun Nov 15, 2009 8:59 am
Nah, not un-interesting. It's progress 
I put up everything I do aswell. It's good to look back over your posts and see what you've done every now and then.
When the guys look at your posts and comment, it's good motivation to know someone is taking notice of what you do.
Keep the posts coming
I put up everything I do aswell. It's good to look back over your posts and see what you've done every now and then.
When the guys look at your posts and comment, it's good motivation to know someone is taking notice of what you do.
Keep the posts coming
Posted: Fri Nov 20, 2009 8:48 pm
Mick's ek has gone soo far!! i remember the very fist day i saw it and to be honest i didnt see much potential, well accept for another ek couch but to see how far it has come is just amaizing, mick should start a resto show like micks restos 
Posted: Fri Nov 20, 2009 10:24 pm
i just ate a beef noodle flavour sachet, by itself!!
Im so tuff .
Im so tuff .
Posted: Fri Nov 20, 2009 10:44 pm
BAHAHAHAHAHA 
did it taste beefy. going to mpa tomorow.. and my nanna might be buying me a tinnie even though she gave me 5g for my car
did it taste beefy. going to mpa tomorow.. and my nanna might be buying me a tinnie even though she gave me 5g for my carPosted: Wed Nov 25, 2009 9:01 pm
mate would you have any idea where i could locate any chrome mirrors to suit my ute? 
Posted: Thu Nov 26, 2009 7:15 pm
My old beer boxes come in handy for making pretend bits of steel,
just as well its VB or the box would be good for Nothin !
Bit of sanding start wit some 60 grit till the shape is right, work it down to
120 ish then etch the bare and prime the dunga.Yes Baby!!
just as well its VB or the box would be good for Nothin !
Bit of sanding start wit some 60 grit till the shape is right, work it down to
120 ish then etch the bare and prime the dunga.Yes Baby!!
Posted: Thu Nov 26, 2009 7:19 pm
I use my fingers on the tight bits