Page 2 of 3
Re: Sedan Refresh
Posted: Sat Sep 14, 2019 9:29 pm
by NoMAD
good job mate... i vote for the scoop haha
Cheers
Nathan
Re: Sedan Refresh
Posted: Sun Sep 15, 2019 6:13 am
by Harv
You can get away with a pretty fair sized scoop on an FB/EK before the fun police can object. I'm planning on running a Hilborn scoop on the meth monster project. I did the mockup/calcs here:
http://www.fbekholden.com/forum/viewtop ... op#p202315
I suspect that Mr Plod may have been less forgiving with the brother-in-law's ideas for my wagon:

- Blown EK_NEW.jpg (125.7 KiB) Viewed 583 times
Cheers,
Harv
Sedan Refresh
Posted: Sat Feb 01, 2020 7:57 pm
by WesternWagon
Bonnet done and a few other spots touched ups with some subtle pearl white on the roof
Now for some new shoes (stop the rubbing)
change rear brakes to drums and drop a few inches
Sent from my iPhone using Tapatalk
Re: Sedan Refresh
Posted: Sat Feb 01, 2020 10:26 pm
by rosco
Looks a treat - are you not happy with the rear discs?
frats,
Rosco
Re: Sedan Refresh
Posted: Sun Feb 02, 2020 8:38 am
by mph
Nice one mate looks a treat
Re: Sedan Refresh
Posted: Sun Feb 02, 2020 9:44 am
by FireKraka
Cool Gaz
Sedan Refresh
Posted: Sun Feb 02, 2020 10:27 am
by Errol62
Paint looks very good Gazza. I do like those wheels. Showsters?
FB ute fixer upper, EK van on rotisserie
Re: Sedan Refresh
Posted: Sun Feb 02, 2020 11:24 am
by EK283
More info required Gary.
What size wheels, why the drum brakes and how did you lower it ?
Regards Greg
Re: Sedan Refresh
Posted: Sun Feb 02, 2020 11:55 am
by WesternWagon
rosco wrote:Looks a treat - are you not happy with the rear discs?
frats,
Rosco
It has XC discs they use the disc as the handbrake and are problematic
Spoke to a few brake places and they all recommend converting to drums
I have a new set that came with a Hotrod project so I’ll give them a go
Regards
Gazza
Sent from my iPhone using Tapatalk
Sedan Refresh
Posted: Sun Feb 02, 2020 11:58 am
by WesternWagon
Errol62 wrote:Paint looks very good Gazza. I do like those wheels. Showsters?
FB ute fixer upper, EK van on rotisserie
Cheers, the Show wheels now come in 15’s and as they are blank you can machine the backspace and have any stud pattern
I have 235’s on the wagon on an 8” rim
Sent from my iPhone using Tapatalk
Re: Sedan Refresh
Posted: Sun Feb 02, 2020 1:24 pm
by Errol62
WesternWagon wrote:
Cheers, the Steelers now come in 15’s and as they are blank you can machine the backspace and have any stud pattern
I have 235’s on the wagon on an 8” rim
Well done. Mini tubs on wagon?
FB ute fixer upper, EK van on rotisserie
Sedan Refresh
Posted: Sun Feb 02, 2020 2:31 pm
by WesternWagon
No mini tubs just relieving the outer inner-guard has a 4 link going in
Sent from my iPhone using Tapatalk
Re: Sedan Refresh
Posted: Sun Feb 02, 2020 4:34 pm
by rosco
Thanks Gazza - if it is of any consolation - I have a 200 series Land Cruiser... the handbrake - I'm almost certain the reason you can't buy a manual one is because of the shocking handbrake... and might leave it in neutral.
It won't hold the vehicle on anything but a slight fall..... as for stopping it with the handbrake - might as well put your hand out the window and show the old "stop" sign... it would slow the big heavy beast down better than the handbrake... at least the warning buzzer goes off if you pull it on in motion.. you wouldn't know otherwise...
frats,
Rosco
Sedan Refresh
Posted: Sun Feb 09, 2020 10:53 pm
by WesternWagon
Happy days
Getting old has its benefits
Couldn’t find my bonnet letters
So I went to the storage shed and found lots more stuff I forgot I had “score” and some letters

Think I have the wagon covered
Then found the original letters right where I left them. Go figure
Who remembers these
Sent from my iPhone using Tapatalk
Re: Sedan Refresh
Posted: Sun Feb 09, 2020 11:06 pm
by Errol62
Drool mate
FB ute fixer upper, EK van on rotisserie