Page 2 of 3
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Wed Jan 22, 2020 6:23 pm
by mph
Pm sent.
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Thu Jan 23, 2020 12:07 am
by DanFranko
Guys - I am ok for now. So if one turns up, please save it for someone who needs it to get back on the road. If several come to light, then I will gladly grab a spare for the EJ parts department.
If anyone needs measurements of a known hydra yoke let me know.
Cheers
Dan
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Thu Jan 23, 2020 12:08 am
by DanFranko
Please if one turns up save it for gpi!
gpi wrote:if Dan doesnt take it, i will, last piece of the puzzle to get the 225 back on the road..
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Thu Jan 23, 2020 7:27 am
by gpi
how many splines does it have? i counted 22?
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Thu Jan 23, 2020 12:58 pm
by mph
i had two spare yokes
one hydro and one trimatic
i can only find one yoke
not sure which one it is ive found though
lets get a id on yokes for future hunting and questions
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Thu Jan 23, 2020 4:56 pm
by gpi
thats why i asked.
how many splines does it have???
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Thu Jan 23, 2020 11:32 pm
by mph
i cant get pictures on flickr
But i counted 26 splines and a gap
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Fri Jan 24, 2020 3:59 pm
by gpi
that is not the one Greg sent you.
Hardy Spicer is a dead end too, they havent sold a hydramatic yoke since 1989...
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Mon Jan 27, 2020 11:16 pm
by mph
gpi wrote: Fri Jan 24, 2020 3:59 pm
that is not the one Greg sent you.
Hardy Spicer is a dead end too, they havent sold a hydramatic yoke since 1989...
Greg ?
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Mon Jan 27, 2020 11:31 pm
by EK283
Hi Guys,
The yolk I sent was indeed the one in the photo page 1.
It has 22 splines and came out of a auto EK Hydro.
Regards Greg
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Mon Feb 03, 2020 10:18 pm
by mph
This is the one i found, still missing my other one.
Sent from my SM-G970F using Tapatalk
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Mon Feb 03, 2020 10:21 pm
by DanFranko
Apologies guys. Here’s a couple of photos. Crap everywhere since the move!
Dan
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Tue Feb 04, 2020 5:50 am
by gpi
Thanks DanFranko,
Are there any identifying numbers on it?
What is the external diameter and slip length?
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Tue Feb 04, 2020 9:09 am
by EK283
Hi Dan,
Its a shame you can't use it.
Can you ream/machine the uni holes to adapt a oversize cup or different size uni maybe ?
I have heard of welding then re machining as well, desperate times call for desperate measures I suppose.
Greg
Re: Wanted : Tailshaft slip yoke (gearbox end) to suit hydramatic
Posted: Tue Feb 04, 2020 11:12 pm
by DanFranko
Hi Greg
It might be salvageable, but as it turned out my repaired one is holding up a-ok and wasn’t the problem.
There must be plenty out there though. They key is identifying them, which is why I kept this one. The info in this thread should also be useful for others who don’t have one presently!
Cheers
Dan
EK283 wrote:Hi Dan,
Its a shame you can't use it.
Can you ream/machine the uni holes to adapt a oversize cup or different size uni maybe ?
I have heard of welding then re machining as well, desperate times call for desperate measures I suppose.
Greg
