Mez..
My 1961 EK Mild Kustom Buildup.
Ok another update.. been a while..
Decided to weld the gap on the front gaurds..
New Bonnet.. This one needs the front straightened and a bit of .. i guess i duno not a ding but not like warpage either.. its just not flat on one area.
Front Gaurd.. Still gotta weld up one more hole on it we've missed.
'53 Buick Rear Bumper. This might get sectioned and end up on the front.
Little Overriders i found near the '53. Also have these really big ones that will end up the indicators. Well.. perhaps. Those small overriders are gona be part of the grill.
Passanger Inner / Outer Sill Nearly Complete. 3mm inner sill same as Drivers side.
And heres some other stuff i've been playing around with the last few days.
What i started with.. a spare cab from my other project. It was a panel truck cab but i've cut the rest off so its now a firewall / cowl / posts. Selling the dash for $100 so i'll throw in a dash from something else vintage.
Its going to end up a roadster. I'm gona use the truck doors and flat top them.. and cut the dash and boot area off a sedan that will look right and weld it all together. It was gona get scrapped but somehow i ended up with another project.
This is what i've started with for this one..
This is what i did..
This is what i've ended up with so far.. A cab with a 5" roof chop.
Decided to weld the gap on the front gaurds..
New Bonnet.. This one needs the front straightened and a bit of .. i guess i duno not a ding but not like warpage either.. its just not flat on one area.
Front Gaurd.. Still gotta weld up one more hole on it we've missed.
'53 Buick Rear Bumper. This might get sectioned and end up on the front.
Little Overriders i found near the '53. Also have these really big ones that will end up the indicators. Well.. perhaps. Those small overriders are gona be part of the grill.
Passanger Inner / Outer Sill Nearly Complete. 3mm inner sill same as Drivers side.
And heres some other stuff i've been playing around with the last few days.
What i started with.. a spare cab from my other project. It was a panel truck cab but i've cut the rest off so its now a firewall / cowl / posts. Selling the dash for $100 so i'll throw in a dash from something else vintage.
Its going to end up a roadster. I'm gona use the truck doors and flat top them.. and cut the dash and boot area off a sedan that will look right and weld it all together. It was gona get scrapped but somehow i ended up with another project.
This is what i've started with for this one..
This is what i did..
This is what i've ended up with so far.. A cab with a 5" roof chop.
Nick.