Info needed:
I am after an ignition switch that will fit the dash hole that has an accessory position. Do EH switches or HD/HR switches fit our dash? And if so, does the key barrel swap?
Thanks, B
Project 2.
Re: Project 2.
Sucker for a rusty bomb
Re: Project 2.
Brett,
Yes, and yes. With certain qualifications. The threaded section of an EH ignition switch is probably the same length as FB/EK, since EH ignition switches fasten directly to the dash. HD/HR ignition switches have a longer threaded section because of the escutcheon.
The lock barrels will interchange . . . he says . . . checks master parts catalogue.
FE-EH ignition lock cylinders have the same part number. HD-HR have a different part number.
You'd be best off chasing down an EH ignition switch.
Rob
Yes, and yes. With certain qualifications. The threaded section of an EH ignition switch is probably the same length as FB/EK, since EH ignition switches fasten directly to the dash. HD/HR ignition switches have a longer threaded section because of the escutcheon.
The lock barrels will interchange . . . he says . . . checks master parts catalogue.
FE-EH ignition lock cylinders have the same part number. HD-HR have a different part number.
You'd be best off chasing down an EH ignition switch.
Rob