door trims

Need something for your daily driver or to finish off that project?

Moderators: reidy, Blacky

Post Reply
Mick
Posts: 4172
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

door trims

Post by Mick »

after a set of matching door trims FB or EK, or i have a pair of red and white FB rears so a pair of red and white fronts
thanks
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Blacky
Posts: 12833
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: door trims

Post by Blacky »

Reckon I can help you out there Mick , if you can't find anything closer. Have a pretty nice set of red and white FB trims here.
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Mick
Posts: 4172
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: door trims

Post by Mick »

Blacky wrote: Tue Nov 19, 2024 10:56 pm Reckon I can help you out there Mick , if you can't find anything closer. Have a pretty nice set of red and white FB trims here.
ok thanks, i'll give it a little longer but i'm interested had posts on facebook pages for ages with no luck
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Mick
Posts: 4172
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: door trims

Post by Mick »

Blacky would you have a rear left bumper corner in reasonable condition at all
thanks
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
In the Shed
Posts: 1998
Joined: Wed May 16, 2012 10:18 pm
State: SA
Location: South Australia

Re: door trims

Post by In the Shed »

Hi Mick

Did see these on bookface if any good?
Attachments
IMG_4449.jpeg
IMG_4449.jpeg (509.42 KiB) Viewed 303 times
A day in the shed beats a day at work!
Blacky
Posts: 12833
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: door trims

Post by Blacky »

Mick wrote: Thu Nov 21, 2024 8:42 pm Blacky would you have a rear left bumper corner in reasonable condition at all
thanks
I dont have any left that aren't dinged mate, like an idiot I gave away or sold all my good bumpers, don't even have a decent set for the 2 door OR the trailer :esad: :esad: :esad:
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
Harv
Posts: 5275
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: door trims

Post by Harv »

G'day Mick,

The photo below is my stash of red and silver trim. They are all in various stages of stuffed-ness, but you are welcome to any of it that helps. It was cleaned maybe 15 years ago with Kenko Shift-It and a nail brush (a tip from Steve Jackson), then ArmourAll'd. The black stuff will come off - it is the sealer/padding from the Special front armrests that tends to drip out over time.

red trim.jpg
red trim.jpg (1.7 MiB) Viewed 281 times


How desperate are you for a bumper corner? I've probably got one, but it will most likely be daily driver condition (probably straight, probably no pimples, but chrome likely scuffed). If that condition suits, I'll see what I have (if it doesn't suit though I'm trying to avoid the hour or so of pulling stuff out to get to them).

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Mick
Posts: 4172
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: door trims

Post by Mick »

In the Shed wrote: Thu Nov 21, 2024 10:18 pm Hi Mick

Did see these on bookface if any good?
i've seen some adds from that fella but don't think i saw that add but he does have a front and rear right door trim on gumtree

Harv, i wasn't particularly after red i just have 2 good FB rear red/white trims (actually i don't really want red as the car will be black and i'm not a fan of that combination but if that's all i can get it's what i'll have to use) as for bumper corner not after anything near perfect just something that isn't painted silver or black
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
User avatar
Harv
Posts: 5275
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: door trims

Post by Harv »

I’ve got a left rear bumper end. Chrome is not perfect, and it has a scratch on the lower side where my finger is. Have not cleaned it at all. Let me know if you need it and Santa will get it into the mail. Would like to keep the bracket and overrider unless you need them too.

IMG_1514.jpeg
IMG_1514.jpeg (3.22 MiB) Viewed 235 times
IMG_1515.jpeg
IMG_1515.jpeg (3.54 MiB) Viewed 235 times
IMG_1517.jpeg
IMG_1517.jpeg (2.92 MiB) Viewed 235 times
IMG_1518.jpeg
IMG_1518.jpeg (3.1 MiB) Viewed 235 times

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Mick
Posts: 4172
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: door trims

Post by Mick »

thanks Harv that should be fine, i think i'm right for the bracket (actually pretty sure i'm right) and definitely don't need the overrider, i'll be passing through Sydney probably on Thursday 12/12 but will probably be lateish at night so could potentially pick it up
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
User avatar
Harv
Posts: 5275
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: door trims

Post by Harv »

No problem. Will separate out the bumper end. If I’m not home, or am asleep I’ll leave it on the front verandah. Will PM some contact info.

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Mick
Posts: 4172
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: door trims

Post by Mick »

Harv wrote: Sun Nov 24, 2024 6:26 am No problem. Will separate out the bumper end. If I’m not home, or am asleep I’ll leave it on the front verandah. Will PM some contact info.

Cheers,
Harv
:thumbsup:
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Mick
Posts: 4172
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: door trims

Post by Mick »

Harv wrote: Sun Nov 24, 2024 6:26 am No problem. Will separate out the bumper end. If I’m not home, or am asleep I’ll leave it on the front verandah. Will PM some contact info.

Cheers,
Harv
Thanks Harv, now i just have to wait for the 378% humidity to fark off in this sh!thole of a place so i feel like going out and doing stuff :roll:
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Blacky
Posts: 12833
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: door trims

Post by Blacky »

Mick wrote: Tue Dec 17, 2024 9:46 pm

Thanks Harv, now i just have to wait for the 378% humidity to fark off in this sh!thole of a place so i feel like going out and doing stuff :roll:
Isn't Coffs Harbour meant to have the most temperate climate in Australia ????
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Mick
Posts: 4172
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: door trims

Post by Mick »

Blacky wrote: Tue Dec 17, 2024 11:56 pm
Mick wrote: Tue Dec 17, 2024 9:46 pm

Thanks Harv, now i just have to wait for the 378% humidity to fark off in this sh!thole of a place so i feel like going out and doing stuff :roll:
Isn't Coffs Harbour meant to have the most temperate climate in Australia ????
temperature is kinda stable rarely gets much under 20 and hot is mid 30s but humidity is insane, i was putting dynamat in the other day a really strenuous job :roll: :lol: my clothes were soaked and sweat was pouring off me
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Post Reply