Harv's (Grace's) EK ute
Re: Harv's (Grace's) EK ute
Sent from my iPad using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Harv's (Grace's) EK ute
Just a quick note for the ute owners. The utes (just like the sedans, wagons and vans) originally had a rubber moulding that sits inside the rear bumper bar ends. It mounts to the body, and seals the bumper ends.
The FE/FC boys are making reproductions here: http://forum.fefcholden.club/index.php?topic=16530.0. The reproductions suit FE/FC sedans. I bought a pair of rubbers, and checked them against my EK wagon - they do not match, as the EK rubber is very different. They cannot be readily cut-and-shut to suit the FB/EK. However, they are a very close match to the EK ute rubbers - see image below, which shows my crappy old original EK ute rubber sitting on a pair of John's repros:
With a little cutting and shutting, they will fit beautifully. The repros are available from Maco (John) on the FE/FC forum at the thread above. John is a great guy to deal with.
Cheers,
Harv
The FE/FC boys are making reproductions here: http://forum.fefcholden.club/index.php?topic=16530.0. The reproductions suit FE/FC sedans. I bought a pair of rubbers, and checked them against my EK wagon - they do not match, as the EK rubber is very different. They cannot be readily cut-and-shut to suit the FB/EK. However, they are a very close match to the EK ute rubbers - see image below, which shows my crappy old original EK ute rubber sitting on a pair of John's repros:
With a little cutting and shutting, they will fit beautifully. The repros are available from Maco (John) on the FE/FC forum at the thread above. John is a great guy to deal with.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
- thebrotherj
- Posts: 679
- Joined: Wed Aug 21, 2013 4:09 pm
- State: NSW
- Location: Sydney
Re: Harv's (Grace's) EK ute
I didn’t even know that utes had these! Now I need to spend more moneyHarv wrote:Just a quick note for the ute owners. The utes (just like the sedans, wagons and vans) originally had a rubber moulding that sits inside the rear bumper bar ends. It mounts to the body, and seals the bumper ends.
The FE/FC boys are making reproductions here: http://forum.fefcholden.club/index.php?topic=16530.0. The reproductions suit FE/FC sedans. I bought a pair of rubbers, and checked them against my EK wagon - they do not match, as the EK rubber is very different. They cannot be readily cut-and-shut to suit the FB/EK. However, they are a very close match to the EK ute rubbers - see image below, which shows my crappy old original EK ute rubber sitting on a pair of John's repros:
With a little cutting and shutting, they will fit beautifully. The repros are available from Maco (John) on the FE/FC forum at the thread above. John is a great guy to deal with.
Cheers,
Harv
Well spotted though. Cheers, Joe
Sent from my iPhone using Tapatalk
Re: Harv's (Grace's) EK ute
The EK hubcaps look awesome on the ute (thanks Clay - the FB caps are on the way back, PM sent with tracking number).
... though it looks even better with these on it:
Cheers,
Harv
... though it looks even better with these on it:
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: Harv's (Grace's) EK ute
Well done Harv I bet Grace is happy so now lets see the Wagon finished.
Neil
Neil
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
- thebrotherj
- Posts: 679
- Joined: Wed Aug 21, 2013 4:09 pm
- State: NSW
- Location: Sydney
Re: Harv's (Grace's) EK ute
bravo Harv
Re: Harv's (Grace's) EK ute
Well done, Harv & Grace. Must be a great feeling.
Re: Harv's (Grace's) EK ute
Beaut job Harv
NOW GET ON WITH THE WAGON
Cheers
Clay
Sent from my iPhone using Tapatalk
NOW GET ON WITH THE WAGON
Cheers
Clay
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Harv's (Grace's) EK ute
good one mate , although considering what a great job you have done with this ute it was really a formality
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
-
- Posts: 1979
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: Harv's (Grace's) EK ute
Looks tops Harv, great outcome. Grace will have to hide the keys from her Dad............
Regards
Stephen
Regards
Stephen
A day in the shed beats a day at work!
Re: Harv's (Grace's) EK ute
Pretty pleased with the ute. Drives nice, though a bit of a slug... forgot how much difference the worked head and headers made on the FB. There's a set of Jack Myer headers in the shed, and some triples, and some rollie rockers.... no, wait, need to finish the wagon first .
Tackled the seatbelts yesterday. Got most of them in, though the passenger inertia reel floor bolt does not want to start. Had to walk away, start again with a cool head this morning.
Cheers,
Harv
Tackled the seatbelts yesterday. Got most of them in, though the passenger inertia reel floor bolt does not want to start. Had to walk away, start again with a cool head this morning.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: Harv's (Grace's) EK ute
Going through all the odds and ends, and realised I had these two rubbers left over:
They are hollow section, though seem pretty flat. Any ideas where they came from? The ute was in pieces when I bought it, so they may be random strays.
Cheers,
Harv
They are hollow section, though seem pretty flat. Any ideas where they came from? The ute was in pieces when I bought it, so they may be random strays.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: Harv's (Grace's) EK ute
They look a bit like the rubbers which go between body and front guard tops where they butt up to the plenum cover.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Harv's (Grace's) EK ute
Parcel turned up yesterday thanks Harv. Mother was a bit confused as it looked like a box we used to have. Magic boomerang. Go the yoots.
Cheers
Clay
Sent from my iPhone using Tapatalk
Cheers
Clay
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Harv's (Grace's) EK ute
No drama, and many thanks for the swap.
Dropped the old tonneau off at the trimmers, should have a new one early next week.
Cheers,
Harv
Dropped the old tonneau off at the trimmers, should have a new one early next week.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.