RUnning a little Hot... any ideas why?

Includes fuel system, cooling system and exhaust.

Moderators: reidy, Blacky

User avatar
Harv
Posts: 5649
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: RUnning a little Hot... any ideas why?

Post by Harv »

May have to run an earth lead from the sender (when it's in the jug/coffee cup) back to earth... they normally earth throught the block and don't read anything if they're just in the mug 8)
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: RUnning a little Hot... any ideas why?

Post by samprinci »

thanks Harv.

she was supposed to go to the radiator man today... but mmmmmmm the weather :roll: :roll:

planing for Wed ???? better weather
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
oldnek
Posts: 1518
Joined: Sun Nov 19, 2006 9:15 pm
State: NOT ENTERED
Location: Ulladulla NSW

Re: RUnning a little Hot... any ideas why?

Post by oldnek »

samprinci wrote:thanks Harv.

she was supposed to go to the radiator man today... but mmmmmmm the weather :roll: :roll:

planing for Wed ???? better weather
Isn't it water proof..................... :shock: Your not painting it. :lol: :lol:
There's nothing as Sweet as a EK V8
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: RUnning a little Hot... any ideas why?

Post by samprinci »

yer I know... :oops: :oops: just being a little precious ??? :wink:
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
Blacky
Posts: 13814
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: RUnning a little Hot... any ideas why?

Post by Blacky »

I've driven my cars in the rain - havent had one shrink yet :lol: :lol: :lol:
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: RUnning a little Hot... any ideas why?

Post by samprinci »

HA! HA! very funny... :(

Just dropped her off to radiator man. fingers crossed 8)


heres another question. do u think keep the filter on after profesional flush???? Ive got a sneaking feeling the top hose which connects to the filter, is restricting flow a little???
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
User avatar
Harv
Posts: 5649
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: RUnning a little Hot... any ideas why?

Post by Harv »

Sam,

The filters a good idea - keep it, and check regularly. If the hoses are kinked, take them off and bend up a piece of coathanger wire to the right shape. Take the coathanger wire into SuperCheap and sort through their radiator hose department until you find one that matches the wire (may have to cut the ends off the new hose to get the right length).

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: RUnning a little Hot... any ideas why?

Post by samprinci »

thanks Harv.

yer the hose I have at moment, I did that. got the hose that closest to the shape i needed. but its still not perfect. slight kink :evil: :evil:

what do u think of this kind of hose ??? & what r they called?

Sam
Attachments
Picture 1.png
Picture 1.png (185.65 KiB) Viewed 784 times
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
User avatar
Harv
Posts: 5649
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: RUnning a little Hot... any ideas why?

Post by Harv »

Hose diameter looks good, as long as it doesn't kink it should be OK.
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: RUnning a little Hot... any ideas why?

Post by samprinci »

sorry might of confused you... that pic was off another forum members car. I was asking what do u think of this style of hose. & what do u call those type of hoses??

would it be worth getting that type of hose to resolve my problem???

ta
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
User avatar
Devilrod
Posts: 7394
Joined: Fri Apr 30, 2004 12:55 pm
State: VIC
Location: Beaconsfield, Vic

Re: RUnning a little Hot... any ideas why?

Post by Devilrod »

I've got a couple on the roadster. I've replace two of them as they kink even easier than normal hose, especially once the spring starts rusting away. Alot softer than normal radiator hoses. I'd avoid it if you can.
Speed and Style........... One day I'll get the speed bit.
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: RUnning a little Hot... any ideas why?

Post by samprinci »

thanks Devilrod.. hummmmmm that doesnt sound good. ok I'll keep away

Just spoke to my radiator guy.. gave it a good clean, but there wasnt a lot of gunk.

But as Ed mentioned, my radiator guy suggested, if the problem still exists???? installing a shroud, Plastic fan & or a external thermo fan??????? :cry: :cry: :cry: :cry: :cry:

crossing my fingers n toes thats its sorted & dont have to do that. let u know tonight after i picked her up

thanks again guys.

sam
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
User avatar
Cal
Posts: 2796
Joined: Sat Nov 08, 2008 8:07 pm
State: NOT ENTERED
Location: Sydney

Re: RUnning a little Hot... any ideas why?

Post by Cal »

For a bone stock grey with factory radiator you shouldnt need to do any of that. if it's still getting hot after the clean out there must be something more to it.

If it's overheating on the freeway like you said, the world's biggest thermo fan isn't going to make any difference.
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: RUnning a little Hot... any ideas why?

Post by samprinci »

thanks a million guys. I really appreciate all your comments.

Picked her up tonight. have taken her for 3, separate 15 min drive. & all the same thing... I think we r ok now.??? She hits about 190 - 195 max. & doesnt go any further. even sitting in traffic.. same. SO over wkend will be the big test. take he on the open road see how she performs.

Shes got a little flat spot. so if the temp goes above 195 on open road, think Ill -

as * Postby oldnek » others issues you may be experiencing is points could be closed a little giving slight retarded ignition timing,"

get that looked at???

but so far so good.

laterz
:wink:
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: RUnning a little Hot... any ideas why?

Post by samprinci »

G'day all.

WOW???? the saga continues!

Ok just to recap!
replaced:
• Water pump
• new thermostat
• radiator recored
• professional engine flush
• radiator filter

so after all that it was still running on 195 - 200

so I shipped her off to the Mechanic (courtesy of NRMA Roadside membership - pays for it self in triples)
IMG_0304.jpg
IMG_0304.jpg (60.56 KiB) Viewed 696 times
Mechanic noticed:
• timing was out. fix
• Did a infared reading- said temp gauge was out by a little, so new gauge installed
• the exhaust had a little leak after the manifold ( this is interesting. said that the hot air coming from the exhaust was also contributing to the increase in temp)
• So full new exhaust system ( it need 1 badly any way)

So finger crossed after all that ??? exhaust system is being installed tomorrow then the mechanic is going to check a few other thing & we'll c what happens...

jezzzz???? who would of thought... such a complicated thing???

over n out.
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
Post Reply