NoMAD's Kustom FB Sedan
Re: NoMAD's Kustom FB Sedan
Way cool
You actually going with a cam grill ?
Looks sick, i think the grey and black would go off man...
You actually going with a cam grill ?
Looks sick, i think the grey and black would go off man...
[img]http://i716.photobucket.com/albums/ww162/brodie_mitchell/av-49951.gif[/img]
Re: NoMAD's Kustom FB Sedan
yeah going to give it a shot... just got a find a few lying around... dont really want to strip the ones out of the full blocks i got here...
and been planning on the gun metal metallic, candy black for a while now and now seeing it on paper i like it even more!
hows yours going? how was the brissie camp?
cheers
Nathan
and been planning on the gun metal metallic, candy black for a while now and now seeing it on paper i like it even more!
hows yours going? how was the brissie camp?
cheers
Nathan
FB/EK Holden Car Club of W.A. Inc
Foundation Member
Foundation Member
Re: NoMAD's Kustom FB Sedan
Im changing my cam soon so you can have the old one outa mine if you want?
You can get somewhat of an idea in your head of how things will look but yeah it definately helps seeing it on paper!
Mines goin slow but yeah its getting there man... got my diff and front end in and the rust is nearly done
I should still be there now, i never went
Blew my arm out in the schoolboys tournament two weeks before i was due to leave..
Had to go under the knife, still early days but its looking good for a decent recovery. Get to see the video of the surgery tomorrow! Should be good
You can get somewhat of an idea in your head of how things will look but yeah it definately helps seeing it on paper!
Mines goin slow but yeah its getting there man... got my diff and front end in and the rust is nearly done
I should still be there now, i never went
Blew my arm out in the schoolboys tournament two weeks before i was due to leave..
Had to go under the knife, still early days but its looking good for a decent recovery. Get to see the video of the surgery tomorrow! Should be good
[img]http://i716.photobucket.com/albums/ww162/brodie_mitchell/av-49951.gif[/img]
-
- Posts: 3430
- Joined: Mon Dec 08, 2008 12:48 pm
- State: NOT ENTERED
- Location: Brisbane
Re: NoMAD's Kustom FB Sedan
You using a stock bonnet ????
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: NoMAD's Kustom FB Sedan
Not at this stage... It's how Scotty drew it, but I haven't got any complaints...Blacky wrote:You using a stock bonnet ????
As for your arm Brodie that sucks dude, mines rooted but that's probably cause I do most my training sitting down icing a hand and my mouth! video should Be interesting, maybe I should watch it and preform my own surgery...
Yeah cheers for he cam offer if I haven't got some by the time you do it I'll grab it... You'll Know if I need it...
Cheers Mick I hope so... When I saw it on that fade job in the other cars section I was like thats awesome!
Cheers
Nathan
FB/EK Holden Car Club of W.A. Inc
Foundation Member
Foundation Member
Re: NoMAD's Kustom FB Sedan
Yeah man, thats rad.
Re: NoMAD's Kustom FB Sedan
I dont blame ya! if i played for Kelmscott I'd have to drink myself silly too hahahNoMAD wrote:As for your arm Brodie that sucks dude, mines rooted but that's probably cause I do most my training sitting down icing a hand and my mouth! video should Be interesting, maybe I should watch it and preform my own surgery...
Yeah cheers for he cam offer if I haven't got some by the time you do it I'll grab it... You'll Know if I need it...
Yeah you could try, after seeing the video its just some basic tools that are needed......
You will require: A scalpal/stanley trimmer, a chisel or bolster, gimpy, pliers/sidecutters, a screwdriver, angle grinder, power drill, die grinder, bit of pelvis bone, a hamstring tendon, a steel plate, 10 of zeniths finest screws and a staple gun... ohh and a shitload of morpheine for later on
On a serious note
The cams only gonna go in the bin otherwise man
And keep up the progress, its lookin goooood!
[img]http://i716.photobucket.com/albums/ww162/brodie_mitchell/av-49951.gif[/img]
Re: NoMAD's Kustom FB Sedan
got started on some more interior mods this weekend....
built and welded up a bracket to take the new interior light....
and fitted up the front speakers into the brackets
and started woirk on the inspection plate and boot ring holders for the handbrake and gear shifter... was hoping to get to the heater as well but have run out of time...
hopefully have all the interior mods done in the next few weeks
Cheers
Nathan
built and welded up a bracket to take the new interior light....
and fitted up the front speakers into the brackets
and started woirk on the inspection plate and boot ring holders for the handbrake and gear shifter... was hoping to get to the heater as well but have run out of time...
hopefully have all the interior mods done in the next few weeks
Cheers
Nathan
FB/EK Holden Car Club of W.A. Inc
Foundation Member
Foundation Member
Re: NoMAD's Kustom FB Sedan
yor useing a 4 speed auto aren't you? only wondered as to shift it's not trimatic is it
Re: NoMAD's Kustom FB Sedan
yeah man 4 speed, TH700ratbox wrote:yor useing a 4 speed auto aren't you? only wondered as to shift it's not trimatic is it
cheers
Nathan
FB/EK Holden Car Club of W.A. Inc
Foundation Member
Foundation Member
Re: NoMAD's Kustom FB Sedan
time to pull my finger out me thinks... no real updates minor things are being done hopefully march is a good month...
i am contemplating the smooth custom fin extenders i think they will suit... i have sent him a pm but not sure how often he's on here (only sent it today) but if im correct he has been injured or not well
anyone know if there still available?
also anyone know a good source of metal pipe with a 3" ID with a wall thickness of a few mm? only need about 200mm to French the front indicators...
cheers
Nathan
i am contemplating the smooth custom fin extenders i think they will suit... i have sent him a pm but not sure how often he's on here (only sent it today) but if im correct he has been injured or not well
anyone know if there still available?
also anyone know a good source of metal pipe with a 3" ID with a wall thickness of a few mm? only need about 200mm to French the front indicators...
cheers
Nathan
FB/EK Holden Car Club of W.A. Inc
Foundation Member
Foundation Member
- Sputzwagon
- Posts: 2708
- Joined: Fri Dec 07, 2007 6:27 pm
- State: NOT ENTERED
- Location: Termeil, South Coast NSW
Re: NoMAD's Kustom FB Sedan
Just PM Paul and you should get a response... I'm sure he has a few fin extender kits lying around his workshop.
Scotty.
Scotty.
[img]http://i249.photobucket.com/albums/gg211/scottyharrod/WOOFTOsmall.jpg[/img]
Woofto Car Club Member No 2
Woofto Car Club Member No 2
Re: NoMAD's Kustom FB Sedan
NoMAD wrote:time to pull my finger out me thinks...
also anyone know a good source of metal pipe with a 3" ID with a wall thickness of a few mm? only need about 200mm to French the front indicators...
cheers
Nathan
Yes it IS time you pulled your finger out - use Harko's 20 minute rule
I have some leftover 3" exhaust pipe from the Chev , that might do the job ??? Will measure the ID tonight.
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: NoMAD's Kustom FB Sedan
yeah blacky, i got some 3" joiner exhaust pipes and have started with that but was hoping for something with a bit thicker wall thickness but may have to go with it, not coming up with much over the last few seaches...
and thanks Scotty...
cheers
Nathan
and thanks Scotty...
cheers
Nathan
FB/EK Holden Car Club of W.A. Inc
Foundation Member
Foundation Member