Page 1 of 1
question on EK body parts
Posted: Wed Nov 25, 2009 12:24 am
by POPS
hey fellas I have a question regarding the EK roller that I picked up last week. Im looking at taking the front fender and door off to install them onto my EK , and I noticed that the grill or vent system which is part of the main body above the bonnet and below the windscreen is very different in design from the roller which I'm assuming is an earlier model Special compared to my driver which is a 62 Special. I have done some rough measurements and all appears to measure the same as far as the panels are concerned.
Am I going to have problems changing panels and components over or will everything changeover ok. Also just on my brief description does anyone know what year the roller is, I'm guessing 1961. It has the Special badge on the glove box.
POPS
Posted: Wed Nov 25, 2009 12:29 am
by (AUST)Mod
No sounds like you have bought an EK parts car with an FB plenum fitted
Will not pose any problems
Andrew
Posted: Wed Nov 25, 2009 12:32 am
by POPS
Posted: Wed Nov 25, 2009 12:37 am
by (AUST)Mod
Plenum is the bit below the windscreen and above the bonnet which is different between the two models. Just my word for it
Andrew
Posted: Wed Nov 25, 2009 12:44 am
by (AUST)Mod
FB has three vertical stainless bits, EK is much flatter in design and doesn't have any bolt on stainless bits
Posted: Wed Nov 25, 2009 12:45 am
by POPS
ok I'll take yor word for it, by the way wot time you cruisin into kelmscott on sunday??
Posted: Wed Nov 25, 2009 1:05 am
by (AUST)Mod
Not until after 12, and it will be in a 1989 Holden (read Isuzu) Jackaroo
Posted: Wed Nov 25, 2009 6:09 pm
by jake08
hi pops as far as im aware 61 and 62 'plenums are the same. More likely youve got a fb body like aust mod says. Not to worry hang ing panels should be compatible though. Front indicator housings are different but so unsure there. Btw what are you doing with drivers side fender and door? Sorry about typing on my phone
Posted: Wed Nov 25, 2009 9:44 pm
by lunatic leprechaun
there's a sniffer on the loose
Posted: Wed Nov 25, 2009 10:21 pm
by mrs ratbox
IF what you have is an FB parts car the panel will go on, but behind the grill and indicator houseing is a bit different you should notice the differance when they are vissable, you can just cut it off or muck around and remove them and swap them over i have EK front panels that i'm putting on the car i'm doing with an FB front and i'm just cutting them off
also holes for badges and chrome strips are a bit different
Posted: Thu Nov 26, 2009 12:25 am
by POPS
thanks for the info fellas. I have to double check but I thought I saw the rollers body compliance plate start with EK, is that normal considering you guys are saying its a bitsa car? I might be wrong I do need to confirm this.
Anyway Jake08 if you are going to Armadale show on Sunday let me know coz my work unit is just around the corner and thats where the cars are, so if you want to have a look at the parts you are most welcome to.
Posted: Thu Nov 26, 2009 12:27 am
by (AUST)Mod
POPS wrote:thanks for the info fellas. I have to double check but I thought I saw the rollers body compliance plate start with EK, is that normal considering you guys are saying its a bitsa car? I might be wrong I do need to confirm this.
Anyway Jake08 if you are going to Armadale show on Sunday let me know coz my work unit is just around the corner and thats where the cars are, so if you want to have a look at the parts you are most welcome to.
I want to visit!
Posted: Thu Nov 26, 2009 12:36 am
by POPS
yeah no worries if your gettin there @ 12 i'll aim for there abouts and you can come and have a look, I also will try n remember those goodies I said I had for ya.
POPS
Posted: Fri Nov 27, 2009 9:46 pm
by jake08
Sounds like I'm taking the blue bomber out on Sunday!
She's not pretty but she's running. Stopping seems to be the main issue now.
Any way my EK is a '61 so we can compare them if you like, but I am positive it's the same as the '62 car I had prior.
Will try to get down there for 12pm- have put off the face to faces for too long long now.
Andrew I will bring that pair of flappers if you still want them?
Just gotta organise a babysitter as I don't have a back seat to hang kiddy seats off!
Jake
Posted: Fri Nov 27, 2009 10:16 pm
by (AUST)Mod
jake08 wrote:Sounds like I'm taking the blue bomber out on Sunday!
She's not pretty but she's running. Stopping seems to be the main issue now.
Any way my EK is a '61 so we can compare them if you like, but I am positive it's the same as the '62 car I had prior.
Will try to get down there for 12pm- have put off the face to faces for too long long now.
Andrew I will bring that pair of flappers if you still want them?
Just gotta organise a babysitter as I don't have a back seat to hang kiddy seats off!
Jake
Yes I still want them
Won't be there until 12:30 at the earliest though
