front swaybar
Posted: Fri Mar 28, 2008 6:54 pm
hi guys just wondering are there any benefits of adding a sway bar for handling purposes on a lowered fb
Page 1 of 1
Posted: Fri Mar 28, 2008 6:59 pm
SHIT YEAH !!!!
Posted: Fri Mar 28, 2008 7:10 pm
Don't forget a rear bar too!
Posted: Fri Mar 28, 2008 7:53 pm
i forgot to ask if it is made to fit a standard fb,ek will it fit with a red motor
Posted: Fri Mar 28, 2008 7:54 pm
Highly recomended
Posted: Fri Mar 28, 2008 7:57 pm
Yep it will fit with a red 
Posted: Fri Mar 28, 2008 10:21 pm
I can only speak for those that don't have one, and mine drives fine, I do have pedders heavy duty lowered suspension on the front, mine is steady as a steady thing (it's the best I could come up with, too drunk 
), Trev 
), Trev Posted: Fri Mar 28, 2008 11:00 pm
Can't think of any reason not to run a front sway bar. I don't run them on the 4wd if doing some serious rock hoping, as it gives you more indendent
wheel traction. Its like a boat on the road though. Maybe when as low as trevs, the low centre of gravity would not produce a lot of body roll to notice a sway bars effect. I would not bother fitting a rear sway bar if your car is lowed, unless you like to step the rear out round corners
wheel traction. Its like a boat on the road though. Maybe when as low as trevs, the low centre of gravity would not produce a lot of body roll to notice a sway bars effect. I would not bother fitting a rear sway bar if your car is lowed, unless you like to step the rear out round corners
Posted: Sat Mar 29, 2008 9:22 pm
van had no sway bar at all but very stiff and low springs
stable at 190kmh by the tom tom
stable at 190kmh by the tom tom
Posted: Thu Apr 17, 2008 8:31 pm
whats the biggest rear sway for a ute?
and where do i buy one?
and where do i buy one?
Posted: Tue May 06, 2008 12:46 pm
I have a rear sway bar that was bought second hand but was originally from K-Mac in Sydney. Came out of a ute and fitted the wagon OK so I guess they must be much the same.
Can't tell you off hand what its diameter is, but can say that it works well!
K-MAC SUSPENSION P/L
366 Princess Highway
ROCKDALE NSW 2216
Ph (02) 9556-1799
Fax 02 9556-1507
E: sales@k-mac.com.au
W: www.k-mac.com.au
Can't tell you off hand what its diameter is, but can say that it works well!
K-MAC SUSPENSION P/L
366 Princess Highway
ROCKDALE NSW 2216
Ph (02) 9556-1799
Fax 02 9556-1507
E: sales@k-mac.com.au
W: www.k-mac.com.au
Posted: Tue May 06, 2008 1:12 pm
I ordered a rear sway bar direct to my door from K Mac a few weeks ago. It arrived promptly and I have told classic olden to bung it on for me I found that with my lowwww springs and all, the rear wheels rubber on the inner guard.
I found that with my lowwww springs and all, the rear wheels rubber on the inner guard.