Page 1 of 1
CRS Adaptor - Turbo 350 to Holden straight 6
Posted: Tue Feb 05, 2008 11:30 pm
by Mephious
Gday Gents
Having dramas with an adaption plate I got from CRS to fit a V8 turbo 350 to the holden 179. At a loss for the converter (turbo 350 type) just doesnt seem to fit. Using a brand new holden 6 flex plate and the bolt holes arent lining up.
Anyone had any experience with these ?
Posted: Thu Feb 07, 2008 7:48 pm
by Mephious
Prob sorted guys - note to anyone using one of these adaption kits.
The converter must be the old old OLD type for the turbo 350.
Posted: Thu Feb 07, 2008 11:42 pm
by Thommo
Im glad you got it sorted Mephious
because we were no help at all
Posted: Fri Feb 08, 2008 5:16 am
by Trev
Yeh, sorry Mephious, I was still trying to get over the fact you need a turbo 350 behind a 179
, what the hell have you done to that engine? Trev
.
Posted: Sat Feb 09, 2008 10:14 pm
by Mephious
Hahahaha just preparing for the V8 guys , nothing special with the 179. The sedan has drained way too much cash unfortunately ... its like 8k over budget and im dipping into other cash now unfortunately which wasnt ment for the cars ( luckily I have a forgiving fiancee').
The van is prepared thou , 9inch , chassis kit, LX master cyclinder with HQ cals and turbo 350. When the cash is saved up again will slot the front end out, rack-n-pinion and column will be all that is required.
Unfortunately the converter from the old old OLD turbo 350 didnt work either ............ so I have to get one fashioned to suit ........... $480 + GST !
Posted: Mon Feb 25, 2008 4:43 pm
by Mephious
