Page 1 of 1
hq stub axels on hr front end
Posted: Wed Aug 15, 2007 12:57 pm
by EK JAY
has any one put HQ holden stub axels on a HR front end
if so did they just bolt straight up
or was there any modification needed to fit them any info
would be good
jay
Posted: Wed Aug 15, 2007 1:49 pm
by mrs ratbox
they go straight on
if you can get H/KTG stubs and use HQ discs callipers it's better for wheel alignment but you can still use the HQ it's just a bit better with the H/KTG
Posted: Wed Aug 15, 2007 2:34 pm
by EK JAY
Thanks ratbox
so will this move the caliper to the rear of the disc
insted of being at the front. Because it catches on the
front end on full lock where it is at the moment
hope this makes sense
Posted: Wed Aug 15, 2007 7:53 pm
by mrs ratbox
you can have the calliper at front or back, just swap left to right and vice versa complete stubs and brakes this will move the calliper to the rear
Posted: Thu Aug 16, 2007 6:52 am
by EK JAY
thanks again ratbox
Posted: Thu Aug 16, 2007 1:56 pm
by Sammy
ratbox wrote:they go straight on
if you can get H/KTG stubs and use HQ discs callipers it's better for wheel alignment but you can still use the HQ it's just a bit better with the H/KTG
i thought the KPI on HR and HQ was the same ?
i know the HQ stubs will change the ride height by about 1 inch but i thought that was all ...
Posted: Thu Aug 16, 2007 5:52 pm
by mrs ratbox
had them on my convertable and it stuck the wheels out at the top
and a mate that has an injected 5L in an EH has HQ stubs and his wheels stick out at the top and he was told by wheel align guy to change to H/KTG
I don't think it's much
hadfeild stubs are one size fits all from HD to HQ and are based on HQ
Posted: Thu Aug 16, 2007 9:38 pm
by EK JAY
i do have both HQ and HK stub axels so wich ones do i use
i guess i could try both and see wich is better
Thanks guys jay
Posted: Thu Aug 16, 2007 11:19 pm
by Blacky
I think the best way is HQ stubs and HK steering arms - send Dr Terry a PM and ask him, he is the guru.
Posted: Fri Aug 17, 2007 12:00 am
by Harko
Blacky what brand of tyre do you use ,they must be a super hard compound ,Youve been doing donuts for years...
Posted: Fri Aug 17, 2007 3:53 pm
by EK JAY
sorry blacky but who is Dr Terry
Posted: Fri Aug 17, 2007 5:07 pm
by FB MAD
Dr Terry is the bloke that wrote 45 years of Holden, 50 years of Holden and soon to be released book 60 years of Holden.
Full of Holden information he is, and like Blacky said, he is the Guru.
Cheers,
The other Terry ( not Dr Terry )
Posted: Fri Aug 17, 2007 5:08 pm
by FB MAD
Posted: Sun Aug 19, 2007 9:26 pm
by Blacky
Harko, im that friggin dizzy I dont know how to stop......
