fbekholden.com

Wanted to buy...
Looking for a ute / van fuel tank filler neck.

Sorry OZ I have the tank but no filler neck

FireKraka wrote: Thu Nov 14, 2024 1:22 pm Sorry OZ I have the tank but no filler neck

With the amount of rusted out tanks around I thought a decent filler neck wouldn't be too hard to find.

There might be one in a wagon I dragged home about a month ago mate - will have a look on the weekend

Blacky wrote: Thu Nov 14, 2024 7:59 pm There might be one in a wagon I dragged home about a month ago mate - will have a look on the weekend

Thanks!....So the wagon has the same neck as a ute but a different tank?

Ute van are same as fe fc wagon but not fb ek wagon.


Sent from my iPhone using Tapatalk

[album][/album]

Errol62 wrote: Thu Nov 14, 2024 8:32 pm Ute van are same as fe fc wagon but not fb ek wagon.


Sent from my iPhone using Tapatalk

Cheers Clay!... That's news to me.

It is down to the rear quarter sheet metal where the filler cap sits. FE FC wagon and FE EK commercial are all the same.


Sent from my iPhone using Tapatalk

Clay is right they are a bit different but if you are going to join it with a piece of rubber hose rather than weld it to the tank it will fit OK.

Blacky wrote: Fri Nov 15, 2024 10:53 am Clay is right they are a bit different but if you are going to join it with a piece of rubber hose rather than weld it to the tank it will fit OK.

The neck is going to be fitted to a Mustang tank so a rubber joiner will be used.

so you don't need a tank - just a neck ? you can buy filler necks aftermarket if you aren't concerned about it looking original

Blacky wrote: Fri Nov 15, 2024 8:10 pm so you don't need a tank - just a neck ? you can buy filler necks aftermarket if you aren't concerned about it looking original

Yep only need a neck.....Think I'd like to keep it looking stock as possible.