Page 1 of 1
EK windscreen moulds (chrome)
Posted: Wed Oct 25, 2023 4:22 pm
by gdavid
Looking for the full set of front windscreen chrome moulds and rear windscreen corner moulds.
Not sure if the FB model will do the job. Any advice is appreciated.
Let me know if you have or recommend someone who can supply.
Re: EK windscreen moulds (chrome)
Posted: Wed Oct 25, 2023 5:31 pm
by Errol62
Hi mate. The moulds are polished stainless, and identical on FB and EK. I don’t have any spare front moulds or rear corners, however I have a set of rear moulds I don’t need. Also, the rear corners can be replicated by cutting down front corners if you happen to have spares of them.
I am in SA, but you shouldn’t have too much trouble finding sets near you as they are one part that never rust.
FB ute fixer upper, EK van on rotisserie
Re: EK windscreen moulds (chrome)
Posted: Wed Oct 25, 2023 10:32 pm
by Blacky
Welcome to the forum mate, get hold of someone in the FB/EK club of N.S.W. - someone is bound to have a set floating around .
Harv or Rob are both Sydneyites and are on here a bit , one of them might be able to point you in the right direction. Are you in Sydney ?????
Re: EK windscreen moulds (chrome)
Posted: Thu Oct 26, 2023 12:15 pm
by ardiesse
I've just been down the back where the spiders live, and I've uncovered a set of (front) windscreen moulds. But no corner moulds, no clip for the top in the middle.
Rob
Re: EK windscreen moulds (chrome)
Posted: Thu Oct 26, 2023 5:08 pm
by Harv
I'm home again this weekend. I'll drop out to where the spooders are and see what I can find in the way of corners and middle clip.
Cheers,
Harv
Re: EK windscreen moulds (chrome)
Posted: Thu Oct 26, 2023 5:33 pm
by gdavid
Errol62 wrote: Wed Oct 25, 2023 5:31 pm
Hi mate. The moulds are polished stainless, and identical on FB and EK. I don’t have any spare front moulds or rear corners, however I have a set of rear moulds I don’t need. Also, the rear corners can be replicated by cutting down front corners if you happen to have spares of them.
I am in SA, but you shouldn’t have too much trouble finding sets near you as they are one part that never rust.
FB ute fixer upper, EK van on rotisserie
Thank for your advice, appreciate it. My rear moulds are good and thanks for the offer.
Re: EK windscreen moulds (chrome)
Posted: Thu Oct 26, 2023 5:35 pm
by gdavid
Blacky wrote: Wed Oct 25, 2023 10:32 pm
Welcome to the forum mate, get hold of someone in the FB/EK club of N.S.W. - someone is bound to have a set floating around .
Harv or Rob are both Sydneyites and are on here a bit , one of them might be able to point you in the right direction. Are you in Sydney ?????
Thank you, yes I am in Sydney and I am in the process of getting in to the FB/EK club of NSW.
Re: EK windscreen moulds (chrome)
Posted: Thu Oct 26, 2023 5:49 pm
by gdavid
ardiesse wrote: Thu Oct 26, 2023 12:15 pm
I've just been down the back where the spiders live, and I've uncovered a set of (front) windscreen moulds. But no corner moulds, no clip for the top in the middle.
Rob
Brilliant Rob, I will take whatever you have (except the spiders
). I live in Sydney, how do I contact you?
Re: EK windscreen moulds (chrome)
Posted: Thu Oct 26, 2023 5:50 pm
by gdavid
Harv wrote: Thu Oct 26, 2023 5:08 pm
I'm home again this weekend. I'll drop out to where the spooders are and see what I can find in the way of corners and middle clip.
Cheers,
Harv
That is a great help Harv. Appreciate your help. David.
Re: EK windscreen moulds (chrome)
Posted: Thu Oct 26, 2023 6:44 pm
by Errol62
If you have a front corner, you can cut for both rear quarters and also the cover clip.
FB ute fixer upper, EK van on rotisserie
Re: EK windscreen moulds (chrome)
Posted: Fri Oct 27, 2023 9:19 am
by ardiesse
@gdavid - I've private-messaged you.
Rob