fbekholden.com

Hi all
Would I be correct in thinking that the tailgate on a FB UTE has a slight curve both up and down as well as left and right ?
Cheers-Rob

Pretty sure you are correct Rob definately the skin does
Neil

Cheers Neil
My tailgate is beaten up pretty well

Rob

Hi Rob hard to find a good tailgate now days you can buy skins but unless you have a frame, or bones I call it, then it does become very hard, I had ended up with 3 before I was lucky enough to grad a good one on ebay cost me $500 and still needed work.
Good luck
Regards
Neil

My inner skin is in extremly poor condition as well. Am going to have a crack at making both inner and outer , will see how it pans out

Cheers- Rob

Good luck Robo I'm sure there are plenty on here that would love to see photos of your progress with it.

Regards
Neil

G’day Robo,
I was just talking to new mate Mark from Hoppers Crossing who is doing an EK Van. He made a new skin from sheet. Only curved it top to bottom he said.


FB ute fixer upper, EK van on rotisserie

Sent from my iPhone using Tapatalk

Not obvious in the first photo, but he has welded a length of 30mm angle to the top hat section brace, corner out. Welded sheet at the top, then bent over the angle, and fixed the bottom. The sides apparently sat perfectly on the frame.
Cheers
Clay


FB ute fixer upper, EK van on rotisserie

Cheers Clay.....that's a great help

ROB