fbekholden.com

any one know of good place to get floor pans for ek sedan front and rear both sides thanks for any help thanks from gazza

gazza116 wrote: Mon Jul 10, 2017 6:28 pm any one know of good place to get floor pans for ek sedan front and rear both sides thanks for any help email me or text thanks from gazza

Either Taylor's Panels ph: 07)32821818 or your local Rare Spares should be able to help you out.
Might be a good idea to edit out your phone number from a public forum!....Never know what type of freak could call!

Hi Gazza
Definately Taylors for the front ones unfortunately he does not make the rear ones and you will have to go to rares for them although I don't like them much I had to by them.

Regards
Neil H

thanks for the help guys

Welcome to the forum Gazza, Taylors was the mob I was trying to remember the name of on the weekend

Got a bit of CRAFT disease ............

gazza116 wrote: Mon Jul 10, 2017 6:28 pm any one know of good place to get floor pans for ek sedan front and rear both sides thanks for any help thanks from gazza

Used all 4 rares ones in my green wagon, fitted no drama

bumper wrote: Thu Jul 13, 2017 2:30 am

gazza116 wrote: Mon Jul 10, 2017 6:28 pm any one know of good place to get floor pans for ek sedan front and rear both sides thanks for any help thanks from gazza

Used all 4 rares ones in my green wagon, fitted no drama

Also used the rates one, no issues with them.

I recently did the floor pans on my FB and contrary to what the other posts say, I found that the front pans which I bought from Taylors DID NOT FIT! both wher 8 mm too narrow and required a lot of rework in other areas _ very disappointing. However the rear pans which I got from Rare Spares just dropped right in with just a little trimming. Cheers, Fraze.

The hydramatic front pressings are different over the north south bracing sections. I haven't seen anyone catering these. I have the Taylor's panels but yet to fit. The holes in my floor are bigger than the replacement panels in any case.
Cheers
Clay


Sent from my iPhone using Tapatalk