Page 1 of 1
Dissy O Ring
Posted: Sat Feb 28, 2015 7:55 am
by WayneXG95
Anyone know where I can get the "0" ring for the distributor to stop leaking oil.?
Blueberry Likes marking her territory....
Re: Dissy O Ring
Posted: Sat Feb 28, 2015 2:14 pm
by Harv
The $2 shops have packets of assorted size o-rings, one of which will fit in a pinch.
No guarentee that they are not natural rubber (instead of viton, teflon or Buna-N) but will probably last just as long as the original.
If you can't find one in a fortnights time PM me and I'll mail you one.
Cheers,
Harv
Re: Dissy O Ring
Posted: Sat Feb 28, 2015 6:23 pm
by WayneXG95
Thanks mate
Re: Dissy O Ring
Posted: Sun Mar 01, 2015 3:04 pm
by parisian62
I got mine from CBC Bearings.
Re: Dissy O Ring
Posted: Mon Mar 02, 2015 5:31 pm
by WayneXG95
Thanks Andrew and Stewart. I think we need a supplier. I'll post again to see what others are doing about this..
Re: Dissy O Ring
Posted: Tue Mar 10, 2015 3:28 pm
by WayneXG95
Found a supplier of O Ring and one for the database. CBC Bearing has these as Stewart informed us
We now have a product number....
The inner Diameter and thickness is ok, you might have to trim it.
Re: Dissy O Ring
Posted: Tue Mar 10, 2015 3:55 pm
by Harv
Alliance Sealing nitrile rubber o-ring, 23mm ID x 5mm thick?
Cheers,
Harv
Re: Dissy O Ring
Posted: Tue Mar 10, 2015 4:41 pm
by WayneXG95
Not the right one Andrew?
Re: Dissy O Ring
Posted: Tue Mar 10, 2015 5:05 pm
by Harv
Sounds right. The Bosch dizzies have got some funky measurements in them, so not suprised a metric o-ring suits.
Cheers,
Harv
