Page 1 of 1
FItting HR stub axles
Posted: Fri Apr 19, 2013 5:13 pm
by fingers
Anyone know if I can fit HR stub axles on back to front ....I need to have the steering arms to the front and the caliphers to the back ..if you know what I mean ..........stub axles on vicy versa, right on left and left on right will this upset the geometry ......any help would be very helpful .....Fingers
Re: FItting HR stub axles
Posted: Fri Apr 19, 2013 6:55 pm
by wot179
Yes,you can swap stubs from side to side,
but theres no way it will work with the steering arms to the front using the original steering box.
More info required for a better response.
Re: FItting HR stub axles
Posted: Fri Apr 19, 2013 7:10 pm
by fingers
wot179 wrote:Yes,you can swap stubs from side to side,
but theres no way it will work with the steering arms to the front using the original steering box.
More info required for a better response.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cheers thanks mate .....Fingers