fbekholden.com

G'day guys,

is anyone able to tell me what people are using in place of the stainless joiner on the top sections of the front windscreen muoulds, I am chasing one if there are any lying around.

Thanks Mark

hi marko
mate iv made a few for people on the forum doc bob was one
i use the bottom corner section of a front sreen mould
just simply cut it with a 1mm cut off blade
it will give you around 48mm in length
these pieces are allready enlarged to fit over the moulding i
il have a look at the workshop tomorrow see if i have any more left
paul

Hi Paul,

is that the small seperate corner piece that joins the long bottom section to the 2 top sections - there always seem to be loads on ebay???

Marko wrote:Hi Paul,

is that the small seperate corner piece that joins the long bottom section to the 2 top sections - there always seem to be loads on ebay???

That's the one Marko

Paul was a great help in getting this sorted for our Wagon (and am still very appreciative Paul )
Even stopped water leaking in through the screen seal!

your welcome bob
marko let me check at the workshop before you go buying one mate

Thanks heaps for your help guys, I have come across so many hurdles over the last 18 months, big and small - and never has one of my questions gone unanswered on this forum.

Thanks to all those who offer their advice to the less experienced like myself.

PAUL, I fly out tomorrow to Cairns to do some final touches on the van, test drive and register - after 12 years off the road - you reckon i'm excited!!!

I do have 2 spare corners in Cairns so I will be able to act on your advice and cut one up - if anyone else needs one let me know, as long as I dont screw up the first cut there will be 3 others for those in need.

Thanks again guys, looking forward to taking my van for a strap and getting it to WA.

Cheers Mark

let me know when its in wa mate
il come for a drive in the chopped ute and have a look
maybe even grab a coffee