Page 1 of 1
volvo diff
Posted: Wed Mar 06, 2013 3:55 pm
by EK JAY
anyone know the correct volvo model that has the disc brake diff that
can be used in a fb ek ?
Re: volvo diff
Posted: Wed Mar 06, 2013 5:30 pm
by Trev
I think any 80's Volvo will be the rite width.
I went to a wreckers and measured a few different models and the all seemed to be the same width.
Re: volvo diff
Posted: Wed Mar 06, 2013 6:36 pm
by EK JAY
Thanks trev just looking at disc brake rear options for the fb
with out needing to get one shortend
Re: volvo diff
Posted: Fri Mar 08, 2013 4:56 pm
by NoMAD
164,165 and 244, 245 models should all be relatively similar... but that model should get the job done.
tape measure never hurts but.
Cheers
Nathan
Re: volvo diff
Posted: Fri Mar 08, 2013 6:06 pm
by wot179
I had one here out of an 84 4 cyl wagon...it was 1420mm face to face from memory...I think EK is 1460mm?
Somebody will confirm that as right or wrong.
Posted: Fri Mar 08, 2013 9:12 pm
by Bluehaze
I remember pulling a diff from an old 244 at the wreckers. The width at the flange was an extra 15mm each end. Still, a tape measure at the wreckers wouldn't hurt.