fbekholden.com

Has anybody made their own panel boards that go between the rear seat and the boot?

I was thinking of using 3mm MDF with maybe some deadener or dynamat on it?

Cheers
Jarvo

Yes I made my own, some ply would do the job.
Can't remember what I made mine out of, it was too long ago.

Thanks Trev

Might give it a crack in the next few weeks

You can use just about anything, I've used both plywood and MDF before.

Thanks DR... Im going to give it a crack with some 3mm MDF, might try the parcel shelf with the same stuff at the same time

You can buy "trimboard" from www.daleys.com.au, it's a thick, black cardboard that is similar to what was used from factory.

Thanks Stinky, I'll check it out... I think there is also a shop not far from me that makes them in the same black board, i was going to try to do it myself just to get more hands on experience but if i do a crap job, maybe i'll just buy a reproduction one

Why would you spend the time making one? I'd just go and buy the reproduction one (unless it was massively expensive or something).

It's $75 on ePay but I thought I could knock one up for $20-30.

MeFB wrote:Why would you spend the time making one? I'd just go and buy the reproduction one (unless it was massively expensive or something).

Where's the fun in that?

Devilrod wrote:

MeFB wrote:Why would you spend the time making one? I'd just go and buy the reproduction one (unless it was massively expensive or something).

Where's the fun in that?

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
I,m with you DR ..........you can look at your job and go ...I did that ...keep up the good work Jarvo it will come together ... Fingers

Go for it jarvo its not hard have to start somewhere to hone those skills
BILLY

jarvo wrote:It's $75 on ePay but I thought I could knock one up for $20-30.

The trim board is around $30 a sheet from memory, save yourself $40 and 1/2 to 1 hour of watching the shite they put on TV these days

I recon I could have made hundreds of them with all the masonite I have ripped out of my house .