Page 1 of 1

Red 308 Alternator bracket

Posted: Tue Oct 16, 2012 1:06 am
by Marko
Hi guys, just wondering if anyone has a v8 alternator bracket lying around that they don't need. All I need is the adjusting arm. Cheers Mark. :thumbsup: 0428271188

Re: Red 308 Alternator bracket

Posted: Thu Oct 18, 2012 1:05 pm
by Doc Bob
Is the alternator passenger side top mount, or driver side low mount?

Probably have both types here and can post up to you.

Re: Red 308 Alternator bracket

Posted: Thu Oct 18, 2012 3:40 pm
by DOLLER
Hey doc do you know if the 308 alt mounts can be fitted onto the 304 inj engine?? Im not running power steering or air con and thought if I could mount the alt up high on the drivers side it will save cutting the inner gaurd on the pass side. Any thoughts???????????? :?

Re: Red 308 Alternator bracket

Posted: Thu Oct 18, 2012 8:35 pm
by Marko
cheers Bob, much appreciated but I have since sourced one. ended up with brand spanken new one, but cost $20.
thanks any way.
the van goes to the auto Lecy early next week, exhaust end of week and upholstery after that.
Then the big road test.
It's getting close, :D :D :D :D :D

Re: Red 308 Alternator bracket

Posted: Fri Oct 19, 2012 11:36 pm
by Doc Bob
Great to see all is working out well Marko!
DOLLER wrote:Hey doc do you know if the 308 alt mounts can be fitted onto the 304 inj engine?? Im not running power steering or air con and thought if I could mount the alt up high on the drivers side it will save cutting the inner gaurd on the pass side. Any thoughts???????????? :?
They all came out stock as passenger side high/low mount, was only the V8 Torana's that ran the drivers side low mount.
304/308 etc are all the same gear, only the VN headed stuff changed a bit, but still pretty much the same :econfused:
You can fit a long bolt through to the front of the head and run a drivers side high mount, but would have to be custom made :(
Not hard or expensive, just need a mate with a couple of tools and an eye for detail :wink:
Let us know if you really need something made and I can suss it out.

All the best......Bob.

Re: Red 308 Alternator bracket

Posted: Mon Oct 22, 2012 7:22 am
by DOLLER
Thanks for that Bob.
Ill get a heap of different pics from the net and have a crack at fabbing one up myself. Surely others have done this mod :econfused:

Re: Red 308 Alternator bracket

Posted: Tue Oct 23, 2012 12:36 am
by Doc Bob
DOLLER wrote:Thanks for that Bob.
Ill get a heap of different pics from the net and have a crack at fabbing one up myself. Surely others have done this mod :econfused:

:thumbsup: :thumbsup: No worries....best to do it yaself, then you know it'll fit :wink:

Re: Red 308 Alternator bracket

Posted: Wed Jan 02, 2013 1:46 pm
by DOLLER
Just found that the VL-VK runs a driverside high mount alt bracket