Page 1 of 1
Twin SU Carbys
Posted: Mon Jun 11, 2012 4:40 pm
by OldMan's Lacky
Would appreciate some advice please:
I have a set of twin SUs. They came with the car but were never used on it. Does anyone know what they are from? They both have number '4468' printed on them. I intend on selling them so thought it best to know what I'm selling first
Cheers
Danny
Re: Twin SU Carbys
Posted: Mon Jun 11, 2012 5:57 pm
by fingers
[quote="OldMan's Lacky"]Would appreciate some advice please:
I have a set of twin SUs. They came with the car but were never used on it. Does anyone know what they are from? They both have number '4468' printed on them. I intend on selling them so thought it best to know what I'm selling first
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
2 inch carbs were fitted to some jaguars, rovers and healeys....... to identify exactly which car ...would need a tag number..........Fingers
Re: Twin SU Carbys
Posted: Mon Jun 11, 2012 6:03 pm
by OldMan's Lacky
Cheers Fingers.
Any easy way of finding that out
?
Re: Twin SU Carbys
Posted: Mon Jun 11, 2012 6:18 pm
by fingers
not that I know of mate .....the same carbs were used on these cars ...and spec,ed up to suit each model and identified by the tag.......could try somebody from the Jag club ...........Fingers
Re: Twin SU Carbys
Posted: Mon Jun 11, 2012 6:36 pm
by OldMan's Lacky
Thanks anyway mate.
Re: Twin SU Carbys
Posted: Mon Jun 11, 2012 6:59 pm
by wot179
They arent 2 inch SUs,they look like 1 1/2 or 1 1/4s.
They will be off some 4 cylinder pommy shitbox,an MG or the like...
Re: Twin SU Carbys
Posted: Mon Jun 11, 2012 7:11 pm
by wot179
Or poke around here for a while.
http://www.sucarb.co.uk/ProductSearch.aspx
You might find something.
Re: Twin SU Carbys
Posted: Mon Jun 11, 2012 9:13 pm
by fingers
wot179 wrote:They arent 2 inch SUs,they look like 1 1/2 or 1 1/4s.
They will be off some 4 cylinder pommy shitbox,an MG or the like...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Sorry......I jumped to the conclusion they were 2'' what size are they please mate ...............fingers
Re: Twin SU Carbys
Posted: Mon Jun 11, 2012 10:54 pm
by wot179
errrr.....did you read my post fingers?
Re: Twin SU Carbys
Posted: Tue Jun 12, 2012 10:36 am
by OldMan's Lacky
fingers wrote: Sorry......I jumped to the conclusion they were 2'' what size are they please mate ...............fingers
They seem to be 1 and a half inches.
Was looking in the 'Technical' section of that website (under SU carbs) and it seems to have an engine flange of a HS2 carb but an intake flange of a HS6 carb
Might just search the uk ebay and see if I can find anything similar.
Cheers guys.
Re: Twin SU Carbys
Posted: Tue Jun 12, 2012 1:49 pm
by OldMan's Lacky