fbekholden.com

20/60 ! any go fast bits for a grey ? thanks

How about a triple su manifold or a set ???
steel cam gear ??
somebody must have something !

fjuteman wrote:How about a triple su manifold or a set ???
steel cam gear ??
somebody must have something !

I know someone whom might want to part with a complete triple 1 1/4 SU and Lynx manifold setup, including linkages and fuel block. Won't be cheap though.
I've been doing a lot of research on grey motor cams lately. The best way to proceed is to get your stock cam reground. Waggott Cams and Wade Cams have quoted me $150 pp.

Go fast grey motor stuff is comming hard to come by. Nov 13th at Bendigo might well be worth a look. I have a set of tripple SU's but havnt seen them reasonably priced for a few years. Almost never see a hot head or cams but Wade will still grind a grey cam and alloy timing gears are still around and extractors can be found on ebay brand new.

How much do you want for the SUs ?

Fjuteman,

My mate will part with his triple grey motor SU setup for $650.
It consists of a Lynx manifold, three 1 1/4 inch SU carbs, all linkages and fuel block. Price reflects that carbs need rebuilding. The manifold also has the bolt holes should you want to install the larger 1 3/4 in SUs.
PM me if interested.

I saw a set at Bendigo for $490 1 1/4 they needed a bit of a cleanup though.

Nah, to expensive. Carbs can be picked up for about $50-$100 e@ that makes manifold about $300-500.
But thats just my opinion !

fjuteman wrote:Carbs can be picked up for about $50-$100 e@...

But they won't be a matched set and they'll need rebuilding too. Anyway, best of luck with it FJ. Professionally rebuilt multiple carby setups, either SU or Stromberg, are not cheap.

You're mates need rebuilding so I'll be no worse off..............cya

Price reflects that carbs need rebuilding.