fbekholden.com

Trouble is I have 3 other doors and there's a troublesome screw behind each one.
More problems..

Nice wagon BTW ..

1962ek wrote:never heard of a guy giving up on a screw before. Just keep working on her.

Mate I give up every day

G'Day Wayne

The secret with the tight screws I know what your thinking "Cherry Plucker" is WD40 then let it sit for an hour or so then give it a couple of slight quick taps, if the head snaps drill it out with a good quality stainless drill, it must be smaller in diametre or you will strip the thread, but before you start drilling use a product called TAP MAGIC it makes the steel easier to drill and saves the life of your drill bit. See link below.

http://www.tapmagic.com/TMprotap.htm

Regards

James