Page 5 of 11
Posted: Sun Oct 05, 2008 11:13 pm
by FATBOY
shouldnt be to long want to put it all together Might redo the roof yet it got a couple of blotches in the flake will wait and see when i cut it with 1500 then 2000 and see what it looks like
regards fat
Posted: Mon Oct 06, 2008 7:31 pm
by FATBOY
some pics to keep you all interested (HARKO BLACKY MINI)
Posted: Mon Oct 06, 2008 7:42 pm
by (AUST)Mod
Errr not good enough. No more advice until we get a whole car shot
Posted: Mon Oct 06, 2008 7:44 pm
by FATBOY
the pics are uploading at the momeNT
Patience grasshoper
regards fat
Posted: Mon Oct 06, 2008 7:57 pm
by FATBOY
Posted: Mon Oct 06, 2008 8:04 pm
by (AUST)Mod
Sickkkkkk
Very Cool.
Grasshopper.
Posted: Mon Oct 06, 2008 8:49 pm
by EKSPCL
MMM sparkly
Posted: Mon Oct 06, 2008 9:16 pm
by Harko
Is that the rainbow effect through it ? I knew you had good taste
Posted: Mon Oct 06, 2008 9:25 pm
by FATBOY
Extremely sparkly in full sun light
regards fatboy
Posted: Mon Oct 06, 2008 10:09 pm
by Devilrod
Mmmmmmm Flakey goodness.....
Posted: Wed Oct 08, 2008 10:28 pm
by minifb
Looks great Fatboy..Keep the pictures coming..Cheers Mark
Posted: Fri Oct 10, 2008 8:59 pm
by FATBOY
Hood lining went in today.Exhaust has been done but now have a split in one of the welds in the extractors so got to cut the exhaust and pull them out and re weld the crack aaarrh.Rear springs were retensioned 2 inches lower will need to buy some 2 inch blocks still not low enough.Front bumpers and rear got painted this afternoon.Floor carpet and seat will go in on monday engineer on tuesday.Glass Friday hopefully.Getting close
regards fatboy
Posted: Fri Oct 10, 2008 10:01 pm
by minifb
LOOK OUT BRIGHT HERE WE COME LOL LOL...........
Posted: Mon Oct 13, 2008 5:23 pm
by FATBOY
Well what a weekend had to pul the whole front end of the ute I forgot to put the panel that covers the wipers on first (bugger)thats what you get for buying project cars.Changed over the wishbones on the passenger side i blasted and painted them as well as new ball joints Installed the drop spindles only to find out that mine are only drilled for commodore calipers (major bugger).
Car is now back at the upholsterers engineers tomorrow.Should get to bed a bit earlier tonight had 4 nights at getting to bed at 100am in the morning.
Front and rear bumpers got painted a fine silver on friday night came up really good.
regards fatboy
Posted: Mon Oct 13, 2008 5:33 pm
by NoMAD
Nice to see/hear Fat,
Shes looking real good in those snipperts of photo's, cant wait to see a complete ride....!
Cheers
NoMAD
