Rusty EK,s Ute

Post photos of your pride and joy, or updates on your rebuild!

Moderators: reidy, Blacky

User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Sorry , no update , me and the ute are not on speaking terms at the moment :cry: I think the bloody thing is jinxed :roll: .

Was loading a bloody great water tank onto my work ute up some planks early one morning , rushing around in the dark , slipped , lost the tank .

Well you can guess what happened , ute was parked not where I usually put it , but right behind where I was loading , I actually screamed out nooooooooooo ,and told her to jump out of the way but she just sat there .

Could not do nothing but watch it hit , luckily it hit on one of the peaks for the 56 taillights which took all the brunt , chiped a bit of paint off the top edge of it , but has also hit the tailgate and creased it about 150mm long and in a couple of mm.

Spent two hours repairing the water tank , looking at the ute and using lots of big boy words that start with f.

So what to do know ? To repair a little dent at this stage is some major work , was thinking about trying one of those ,Mr ding goes , type of fellas to see if they can fix it .

But am a bit pissed with myself and have not been back to it :cry:
User avatar
samprinci
Posts: 1111
Joined: Thu Aug 06, 2009 10:17 am
State: NOT ENTERED
Location: Nthrn Beaches / Liverpools - Syd

Re: Rusty EK,s Ute

Post by samprinci »

DOH!!! sorry to hear that mate.... definitely a bit of bad luck..... but they usually come in 3's ?????

:cry: :cry: :cry:
Join the fun! Join the club! - FB-EK Holden Car Club of NSW
www.fbekholdennsw.com
parisian62
Posts: 3996
Joined: Wed May 11, 2005 2:19 pm
State: NSW
Location: Sydney
Contact:

Re: Rusty EK,s Ute

Post by parisian62 »

Maaaaaate! Are you sure some sort of hex spell hasnt been out on you? That is serious bad luck.

Walking away was probably the best thing to do. I'm sure you can sort it out.

Stewart
Feelin free in a '61 FB.
Member of FB-EK Holden Car Club Of NSW Inc.
Check out the Rebuild of Old Timer
OldMan's Lacky
Posts: 232
Joined: Wed May 11, 2011 8:35 am
State: NOT ENTERED
Location: The Capital

Re: Rusty EK,s Ute

Post by OldMan's Lacky »

Sorry for asking Rusty :oops:

You know what they say though don't you ... a rebuild is only as good as the stories behind it!!! Okay I don't know who said it, but it seems appropriate :thumbsup:

Good luck mate!! Looking forward to the next instalment of your saga ...
searsy
Posts: 629
Joined: Sun Jun 26, 2011 2:45 pm
State: NOT ENTERED
Location: Lismore NSW

Re: Rusty EK,s Ute

Post by searsy »

damn that sucks mate u must have felt like going to the pub for a week after that :x :x :x
Some of those paintless dent remover blokes are pretty damn good at what they do.
Ask around the panel shops or car yards , find the best one will be better than trying to match the pearl necklace (sorry couldn't help myself :lol: :lol: )
Oh the joys of it all
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Thanks Guys , rang a couple of the paintless dent removal guys today , no luck there , they need to get behind it to knock it out , could do that myself if I could get in there :roll:

I thought they had some sort of a sucker thing to pull the dent out , apparently not , best they could come up with was to drill a 50mm hole on the inside , knock it out and then put a rubber grommet in the hole , that will look nice :) .

Have to sleep on it a few more days and see what I can come up with .
User avatar
Mai Ki-Ki
Posts: 303
Joined: Mon Mar 01, 2004 3:59 pm
State: NOT ENTERED
Location: Melbourne

Re: Rusty EK,s Ute

Post by Mai Ki-Ki »

Sorry to hear about the set-back.....all the best in getting it fixed without too much drama!
The Kardinals, Melbourne.
stillute-ed
Posts: 306
Joined: Thu Dec 25, 2008 7:23 pm
State: NOT ENTERED
Location: hobart

Re: Rusty EK,s Ute

Post by stillute-ed »

g'day rusty ive got four different sucker's here so if you want to give them a try give us a hoy . 50mm 100mm 2oomm and a double 100mm telephone type oh and a old style land mine type got to be carfull with that one had glass explode on me using that one year's ago. that wakes you up !
I AM CAPTAIN AND COMMANDER OF MY OWN VESSEL (and i have my wife's permission to say so)
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Are you still here :D , you have been quite , how is your ute going ??

Might take you up on the smaller one , had a bit of a lash with a super toilet sucker thingy , made a end for it , got it out a bit , was just going to get over it and paint it ,but just have not had any spare time of late to do anything to the poor old girl .

Will give you a call when I get back to it :D
User avatar
Mai Ki-Ki
Posts: 303
Joined: Mon Mar 01, 2004 3:59 pm
State: NOT ENTERED
Location: Melbourne

Re: Rusty EK,s Ute

Post by Mai Ki-Ki »

We are watching with interest...!

:shock: :thumbsup:
The Kardinals, Melbourne.
User avatar
Devilrod
Posts: 7394
Joined: Fri Apr 30, 2004 12:55 pm
State: VIC
Location: Beaconsfield, Vic

Post by Devilrod »

Bugger Rusty! That sucks....
User avatar
John
Posts: 717
Joined: Sun May 17, 2009 7:28 pm
State: NOT ENTERED
Location: Ulverstone Tasmania

Re: Rusty EK,s Ute

Post by John »

She fixed mate?
Not all chemicals are bad. Without chemicals such as hydrogen and
oxygen, for example, there would be no way to make water, a vital
ingredient in beer
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Nah , just have had no spare time at all lately :(
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: Rusty EK,s Ute

Post by Rusty EK »

Ok, have gave myself another kick up the butt and stoped stewing over the dent I put in the tailgate :cry: , have got it out a fair bit and am just going to get over it .

Have decided to have a couple days off work and get the thing clear coated before winter really hits , so she is back apart again , matched the pearl up inside the doors , guards etc today .

Block her down the next couple of days and throw the clear on , then put her back together over winter.

Image
User avatar
John
Posts: 717
Joined: Sun May 17, 2009 7:28 pm
State: NOT ENTERED
Location: Ulverstone Tasmania

Re: Rusty EK,s Ute

Post by John »

Looks like you're in for a big weekend :)
Good luck with it. :thumbsup: :thumbsup: :thumbsup:
Not all chemicals are bad. Without chemicals such as hydrogen and
oxygen, for example, there would be no way to make water, a vital
ingredient in beer
Post Reply