Page 237 of 303
Re: Clay’s Wedgewood Blue FB Ute
Posted: Sat Dec 18, 2021 12:16 pm
by Harv
Errol62 wrote: Sat Dec 18, 2021 11:59 amI’m not sure if the roller rockers will fit under a factory cover. I was intending to put one on with 179X2 decal.
You could have an arts-and-crafts day and make up a spacer to go under the factory rocker cover. Ally or PTFE would do it.
Cheers,
Harv
Re: Clay’s Wedgewood Blue FB Ute
Posted: Sat Dec 18, 2021 2:30 pm
by Errol62
Someone on the torana forum cut and shut one but still hit rear valve.
This should look the part.
Sent from my SM-G781B using Tapatalk
Re: Clay’s Wedgewood Blue FB Ute
Posted: Sat Dec 18, 2021 5:22 pm
by Errol62
Fitted a passenger side mirror, which is actually just another driver side stalk. Nasco lens would only point down and away from the side, so swapped to another lens wiith more articulation.
Sent from my SM-G781B using Tapatalk
Re: Clay’s Wedgewood Blue FB Ute
Posted: Sat Dec 18, 2021 9:33 pm
by ekv8ute
That’s pretty
Sent from my iPhone using Tapatalk
Re: Clay’s Wedgewood Blue FB Ute
Posted: Sun Dec 19, 2021 12:14 pm
by Orange Betty
Looks great Clay
Dave
Re: Clay’s Wedgewood Blue FB Ute
Posted: Sun Dec 19, 2021 12:58 pm
by Errol62
Thanks fellas. Still may grind the fins off so I can put the decal on.
FB ute fixer upper, EK van on rotisserie
Re: Clay’s Wedgewood Blue FB Ute
Posted: Sun Dec 19, 2021 1:01 pm
by BILLY BLACKARROW
Leave the fins alone they look good
Re: Clay’s Wedgewood Blue FB Ute
Posted: Mon Dec 20, 2021 9:16 am
by Errol62
OK Billy.
Dropped ute to exhaust shop for rectification.
One of my Sampson's has a slow leak. Turns out the rim has gone a bit porous. Solution is to strip and paint the inside.
Sent from my SM-G781B using Tapatalk
Re: Clay’s Wedgewood Blue FB Ute
Posted: Mon Dec 20, 2021 9:22 am
by EK283
Paint the inside of the rim with por15, that will seal it and be hard as nails !!!
Greg
Re: Clay’s Wedgewood Blue FB Ute
Posted: Mon Dec 20, 2021 10:15 am
by Errol62
I think I will use Epotec Greg.
FB ute fixer upper, EK van on rotisserie
Re: Clay’s Wedgewood Blue FB Ute
Posted: Tue Dec 21, 2021 10:14 pm
by oz_ek
Errol62 wrote: Sat Dec 18, 2021 11:59 am
I’m not sure if the roller rockers will fit under a factory cover. I was intending to put one on with 179X2 decal.
FB ute fixer upper, EK van on rotisserie
Any help?.....
http://www.kustombitz.com.au/p/4252638/ ... -10mm.html
Re: Clay’s Wedgewood Blue FB Ute
Posted: Wed Dec 22, 2021 5:29 am
by Errol62
Thanks Phil, that is a very good idea. Gee the costs start mounting. You know what a Gumtree bargain hunter I am. Alloy rocker cover cost me about $50 delivered.
Column is with Roger Hancock so saving pennies for that at the moment.
FB ute fixer upper, EK van on rotisserie
Re: Clay’s Wedgewood Blue FB Ute
Posted: Wed Dec 22, 2021 10:31 pm
by Errol62
Bloody annoyed now as the roller rockers seller contacted me through ebay to say he has cancelled my order. Apparently their stock was incorrect and won't be replenished until February. I was prepared to wait and currently seeking to get the order reinstated.
Sent from my SM-G781B using Tapatalk
Re: Clay’s Wedgewood Blue FB Ute
Posted: Thu Dec 23, 2021 12:31 pm
by FbSTDwagon
Cant contact Yella Terra direct for a set or rollers?
Playing with other brands is touch and go from what I have heard.
Re: Clay’s Wedgewood Blue FB Ute
Posted: Thu Dec 23, 2021 5:47 pm
by Errol62
Crow are pretty reliable. What you heard Drew? Yellow Terra are out of my price range.
Sent from my SM-G781B using Tapatalk
