This is reprehensible.tankfairlane00 wrote: Tue Dec 31, 2019 11:00 am
The engineers at pbr said they scrapped the mould because they had mistakenly used the wrong rubber and didnt want to be forced to do a recall.
Hope this helps.
VH24 Booster into EJ - advice needed + request for parts
Re: VH24 Booster into EJ - advice needed + request for parts
-
tankfairlane00
- Posts: 6
- Joined: Sat Dec 21, 2019 7:33 pm
- State: QLD
Re: VH24 Booster into EJ - advice needed + request for parts
Hi,
Yep they did make mistakes back then. They forgot to allow for the vacuum sucking the engine oil fumes back to the booster when you turn off the engine and affecting the main diaphragm rubber. Basically there was two rubber types those that were external and those that came in contact with brake fluid. Unfortunately should have used the chemical resistant type, they used the wrong one. That's also why they ask you to instal as high as possible under the bonnet.
Anyone that has a main diaphragm shape that doesn't look like the pictures I posted has been affected. The rubber stretches to the shape of the booster and become soft and stretchy therefore not transferring the vac to the piston properly.
reprehensible isn't the word I would have used, criminal would be better. Is their eyes it wasn't dangerous because you don't loose your brakes just the boost.
In general PBR parts are quality made until they sent all the moulds to india a few years ago, I doubt they are as well made.
Yep they did make mistakes back then. They forgot to allow for the vacuum sucking the engine oil fumes back to the booster when you turn off the engine and affecting the main diaphragm rubber. Basically there was two rubber types those that were external and those that came in contact with brake fluid. Unfortunately should have used the chemical resistant type, they used the wrong one. That's also why they ask you to instal as high as possible under the bonnet.
Anyone that has a main diaphragm shape that doesn't look like the pictures I posted has been affected. The rubber stretches to the shape of the booster and become soft and stretchy therefore not transferring the vac to the piston properly.
reprehensible isn't the word I would have used, criminal would be better. Is their eyes it wasn't dangerous because you don't loose your brakes just the boost.
In general PBR parts are quality made until they sent all the moulds to india a few years ago, I doubt they are as well made.
-
tankfairlane00
- Posts: 6
- Joined: Sat Dec 21, 2019 7:33 pm
- State: QLD
Re: VH24 Booster into EJ - advice needed + request for parts
Tim,
Im originally from SA and Vic so dont know any tankfairlane people up here. Have heard his name. Noone up here knows I have quite a collection of parts as I dont sell anything.
Ive only got two tankfairlanes now as I cut my collection down from six, both have very low milage. Plus other models. My daughter caught the bug and has alot of cars of her own so I didnt save any space when I cut down. We have a car graveyard for the overflow.
Got a mate looking for a 70's C$ tranny, funny how most people threw them out and now they are rare. Ive got alot of the rare stuff like the boosters that everyone get told cannot be fixed. You may have guessed I'm a big fan of them.
Kevin
Im originally from SA and Vic so dont know any tankfairlane people up here. Have heard his name. Noone up here knows I have quite a collection of parts as I dont sell anything.
Ive only got two tankfairlanes now as I cut my collection down from six, both have very low milage. Plus other models. My daughter caught the bug and has alot of cars of her own so I didnt save any space when I cut down. We have a car graveyard for the overflow.
Got a mate looking for a 70's C$ tranny, funny how most people threw them out and now they are rare. Ive got alot of the rare stuff like the boosters that everyone get told cannot be fixed. You may have guessed I'm a big fan of them.
Kevin
-
tankfairlane00
- Posts: 6
- Joined: Sat Dec 21, 2019 7:33 pm
- State: QLD
Re: VH24 Booster into EJ - advice needed + request for parts
Ask tony about the fairlane 700, the rarest fairlane that almost made it to market in the US. They used the eclipse emblem on the front guards etc.
Ours were all based on the canadian meteor so we didnt get that emblem.
Kevin
Ours were all based on the canadian meteor so we didnt get that emblem.
Kevin