fbekholden.com

JJJJEEEEEEESSSSSSSSSuus you bloody Perthites......need me to draw a mud map of how to find the Ravo Pub..only been there 150 years or somethink!
Oh yeah, and that little stalk and green flashy thing on the dash will tell ya's where to turn in....in my EK, I can't drive past the joint without that bloody thing turnin' itself on

Hope you all have a great cruise down guys....should turn a few heads

well i had another weekend off motocross as jayden is injured again which is a good thing cause i get to work on the 32
i got my pulley and bracket system in this week
its a cvf racing unit from the states
very nice set up and easy to fit
bolts up to the reverse rotation water pump
aircond bracket and alternator bracket work with a adjuster rod and runs a serpentine belt
found a bottom radiator hose from a hq holden
just need to find a suitable top hose now getting ever so closer week by week
paul

Any progress of late mate ?
I am enjoying this build.

thanks pauly
yes lots of progress but nothing really photo worthy
its up on the hoist next week to do some final pieces underneath
then final strip down and start putting colour on the chassis and body panels
il do a tech on the paint prep and body work
once i have them on the 2 rotisserys
paul

Looking forward to seeing it Paul

drop in the workshop any time jay

CHOPPED wrote:drop in the workshop any time jay

Funny you say that! I was in the area today and thought you could have been working on it.
Didn't see the work ute out the front so I kept going haha

ahh spewing j i would have been there
sold the xr8 ute and brought a new malloo last month so you may have been looking for the wrong car

well it was a big day for me today with the 32
i took it to tac for its 2nd inspection
for those of you that dont know once we have passed this you are ready to go back home and finish the car so you can present it as a finished rod
the guys there have been so helpfull
they have offered great advice from day 1
our rod licencing system is 2nd to none
its been a really enjoyable ride so far
so its back to the workshop to start tear down and get this thing finished
will do some more updates of chassis and body paint as i go
i may even have it ready for my 51st birthday
paul

Happy days Paul can't wait for more updates
Keep us posted

well iv been slowly plugging away at finishing things on the 32 in the last few months
iv just about finished the toy shop and got all my cars in there
hoist is all done and most of my memorabilia is on the walls
finished all the corrigated iron which runs at 1100 up from the floor to give it some character
also built a heap of cabinets with benches so everything gets stored away
so i started pulling down the coupe today i cant believe how easy it is to work on a hoist instead of on your back under a car

i have a big piece of carpet on the floor so i can put all the finished parts down without getting lost or damaged


so tomorrow after motocross il get the rotisery down from the mezzanine and bolt up the body so i can start doing the paint prep

chassis will get pulled down also and go on 2 engine stands that i have just to make it easier
full steam ahead hoping to wrap it up for my 51st
paul

Hoist and room is great !

Don't you just hate it when the car has to come apart after you build it once, there always seems to be things missed or stuff that needs minor tweaking.

Should be nice going from now on with the hoist and all.


Regards Greg

well i spent a little time at the toy shop today
as i like to do evreything on my own i came up with a plan to lift the body off the chassis
im fcukin loving this hoist
a little manoeuvring of my lift straps and up we went

wheeled the chassis clear of the body and set it down on a trolley


took all my fenders and running boards to the cabinet shop and started the big task of body work
in prep for paint


lots for me to do
slowly making progress now
paul

Mate. Call the. Cops

Some clown has put the dizzy hole in the wrong end of ya engine

blocking rubbing blocking rubbing yeah i know you dont see it but i cant help myself allright