fbekholden.com

I asked this on old holden yesterday but Ill check here as well if you dont mind.
have I lost a washer?

I finely opened a box of stuff Ive brought off the net and found it all to be there and couldn't find something wrong with at least one part.
Thanks streetneat (even thou i brought the bits from you that long ago i doubt you remember selling them).
We finely got the doors to fit nicely strange how the openings relaxed a bit while the doors where off for years. Not the little bit we lost during repairs

I would like to say ill paint it its final coat today but lets hope Ive finished by the end of the week.

List of parts I still need to buy
back passenger window
to be continued hundreds of things Ive not thought of

i have plenty of glass not sure how postage will go, let me know, i'm in central west NSW, think i have a bit of hinges latches mechanisims etc aswell

Looking good Stevo , and there should be a washer under there , well there was one on mine anyway

The quality of your work is fantastic! ell done. Makes me tired just looking at doing it!

Cheers

Paul K

Im slowly putting the ek back together. Finding parts can be challenging at times dont lose the bolts.

the next mission.

any tips post on pulling the drag link apart and where what brands of tierod ends to buy?

remove the split pin in each end of the drag link, undo the plug down the tube with a fn big flat screw driver and a series of cups and springs should come out releasing the tie rod end .

Ive got the drag link In pieces lets hope I put it back together the same way it come apart.

How did you go putting the doors back on painted and getting them lined up?

Honestly I lost a little during rust repairs I guess and had to buggirse around abit to get them back on but they wheren't that hard to get on and Im quite happy with the way they fit now. Unless the Ek didnt fit together as well as I thought it did before we took it apart. I like the gaps to be right.
when I say buggerise around in the back right door jam I had to do some more painting as I had to hammer the bottom of the pilleir abit as I wasn't happy with the gap the first time It wasn't much wrong but it wasn't right I must of caused it as I a rust repair there.

Anyone know what happened to this one??

I'm still going my old man died early last year not a real lot has happened on the ek since but the ek is still happening I finished a few other project my dad was doing. I run out of web hosting so some of my pictures have probably disappeared sorry about that I"m trying spend more time in the shed. I need to get some help.

Sorry to hear that mate, good to see your still going though

thanks ole mate my Dad was 70 he thought he had plenty of years left and there was no hurry . He used to comment there wasn't too many old panel beaters and spray painters . He went and visited his mate the night before he died so he did as he wanted till his very last day don't get old don't get sick the quack told him too piss off the day before he died, he died walking up the ramp leaving Dandenong Hospital.