fbekholden.com

ANy more progress

slow slow progress, barely had a change to get out there in the last 2 months....

just stocking up on parts and getting the grinder out when possible!

as soon as something is solid i will take some happy snaps...

Cheers
Nathan

anything

Try Fagestra stainless steel in Wetherill Park NSW, failing that try Metal land or One Steel

Regards

James

searsy wrote:anything

at the moment no... just doing a whole heap of body work, trying to finally get all the rust sorted.

currently rebuilding the passenger 'A' pillar which is an absolute mess, well would be if most of it was there and metal (if anyone's got a cut lying about I would be happy to know about it)

i'll try and get some updated pictures soon.

Cheers
Nathan

NoMAD wrote:

searsy wrote:anything

at the moment no... just doing a whole heap of body work, trying to finally get all the rust sorted.

currently rebuilding the passenger 'A' pillar which is an absolute mess, well would be if most of it was there and metal (if anyone's got a cut lying about I would be happy to know about it)

Nathan , Nathan , Nathan - you KNOW where to come for parts - I have a wagon here with good A pillars , and a grinder/gas axe

[/quote]

Nathan , Nathan , Nathan - you KNOW where to come for parts - I have a wagon here with good A pillars , and a grinder/gas axe [/quote]

yeah you think i would have learnt by now... which weekend and when are you free next?

Not sure what the condition is like under the the primer and i know it needs a bit of work to make the chev bullets fit properly and be fixed securely but im not going to use that bonnet I've got, so will be on the hunt for a good/repairable one as well, but if you want it your welcome to it and the bits.

Cheers
Nathan

I think there are 5 bonnets here , should be able to find a good one. I will be home this weekend and next weekend at this stage - unless something blows up somewhere

Sweet as mate, i got to be somewhere Saturday just before 11, so i'll give you a buzz when I've finished that.

Cheers
Nathan

NoMAD wrote:

Nathan , Nathan , Nathan - you KNOW where to come for parts - I have a wagon here with good A pillars , and a grinder/gas axe [/quote]

yeah you think i would have learnt by now... which weekend and when are you free next?

Not sure what the condition is like under the the primer and i know it needs a bit of work to make the chev bullets fit properly and be fixed securely but im not going to use that bonnet I've got, so will be on the hunt for a good/repairable one as well, but if you want it your welcome to it and the bits.

Cheers
Nathan[/quote]
I would love that bonnet

I would love that bonnet

Well its currently sitting on a two door... and you'll need to speak to someone else!

cheers
Nathan

Jut kicking back on the weekend obtaining parts from the resto shop in the hills...



Cheers
Nathan

Aha! The WA ghost who chops!

i know im long overdue for photos... but managed to get the 'A' pillar cut out and new one tacked in the other day...

hopefully get it all fully welded up soon and finish off the repairs in that area and have a major area finished.

Cheers
Nathan

Well just to prove my project and myself aren't dead... here's something....

started working on the boot floor with the falcon tank in.







nothing to fancy... needs a second skin, so i can create some storage compartments in the wells, access to shocks etc... all will be sealed and the top layer wrapped.. in what i havent decided yet.

Cheers
Nathan