Page 108 of 109

Re: Project 2.

Posted: Thu May 21, 2026 5:23 pm
by Brett027
Blacky wrote: Thu May 21, 2026 4:57 pm Coolio 8) looking forward to seeing it in action in Stanthorpe in a couple of weeks time :thumbsup: :thumbsup:
You had your chance to see it last year and you piked.

Re: Project 2.

Posted: Thu May 21, 2026 6:30 pm
by Brett027
Errol62 wrote: Thu May 21, 2026 5:18 pm Great result. Three times everything gets dear. Been looking for filters for SUs with little joy.


Sent from my iPhone using Tapatalk
I have a set of round paper element ones same height for my cd175s. They should fit your SUs.

Re: Project 2.

Posted: Thu May 21, 2026 7:22 pm
by Brett027
These?

Re: Project 2.

Posted: Thu May 21, 2026 7:54 pm
by Errol62
Yes. They are the same a I have on my ute. The only downside with mine is that you have to take the bases off in order to use the vacuum synchronising tool as they have a strap across the opening to accept the top cover bolt.


Sent from my iPhone using Tapatalk

Re: Project 2.

Posted: Thu May 21, 2026 11:12 pm
by Blacky
Brett027 wrote: Thu May 21, 2026 5:23 pm

You had your chance to see it last year and you piked.
Careful what you wish for - I have pencilled in a shed tour and a cuppa at your joint the day we leave Sydney and head for Stratford to catch up with me mate Kuna Jack and Mr Allardyce the grey motor whisperer 8) Probably Tuesday June 16

Re: Project 2.

Posted: Thu May 21, 2026 11:56 pm
by Brett027
Maybe you do things differently in WA, but here we usually ask to visit, not tell.

Re: Project 2.

Posted: Fri May 22, 2026 12:16 am
by Errol62
Brett027 wrote:These?
Thanks for the tip. Unfortunately the Redline site, which is rather confusing and not too user friendly, shows them out of stock. In fact they show around half their air filter assemblies out of stock. I found them on eBay but marked up by 50%.


FB ute fixer upper, EK van on rotisserie

Re: Project 2.

Posted: Fri May 22, 2026 6:21 am
by Craig Allardyce
Blacky wrote: Thu May 21, 2026 11:12 pm
Brett027 wrote: Thu May 21, 2026 5:23 pm

You had your chance to see it last year and you piked.
Careful what you wish for - I have pencilled in a shed tour and a cuppa at your joint the day we leave Sydney and head for Stratford to catch up with me mate Kuna Jack and Mr Allardyce the grey motor whisperer 8) Probably Tuesday June 16
Thanks for the warning😉

Re: Project 2.

Posted: Fri May 22, 2026 7:23 am
by Brett027
Errol62 wrote: Fri May 22, 2026 12:16 am
Brett027 wrote:These?
Thanks for the tip. Unfortunately the Redline site, which is rather confusing and not too user friendly, shows them out of stock. In fact they show around half their air filter assemblies out of stock. I found them on eBay but marked up by 50%.


FB ute fixer upper, EK van on rotisserie
I dont need mine anymore.🙂

Re: Project 2.

Posted: Fri May 22, 2026 8:14 am
by Errol62
I thought you would keep them packaged with the CD-150s but if not I would be very happy to buy them from you. Will send you a PM.


FB ute fixer upper, EK van on rotisserie

Re: Project 2.

Posted: Fri May 22, 2026 10:12 am
by Blacky
Brett027 wrote: Thu May 21, 2026 11:56 pm Maybe you do things differently in WA, but here we usually ask to visit, not tell.
That was me asking :lol: that's why its pencilled not inked :D

Re: Project 2.

Posted: Tue May 26, 2026 10:01 am
by Brett027
Anyone chasing door bits? Free to a good home if you stump up postage.

Re: Project 2.

Posted: Thu Jul 16, 2026 6:30 pm
by Brett027
New exhaust on yesterday to make it exhale better. I finally put the tow bar back on and the old exhaust no longer fitted without banging on things. So it had to be upgraded. Geoff at GRod Exhaust in Latham, ACT did a neat job and it has a nicer tone and maximum flow with its mandrel bends and shiny chrome tip. A few flanges so it can come apart easier if need be as well. A noticeable improvement on the way home. This thing is a real joy now- well apart from driving through Canberra with 42 traffic lights in a 50 minute drive.

I think I can extract a few more ponies as the air/ fuel guage is showing me it is leaning out on acceleration. Something to play with.

Re: Project 2.

Posted: Thu Jul 16, 2026 6:38 pm
by EK283
What size is the exhaust Brett ?

Come to Sydney, that will cure your traffic anxiety anywhere else !

Greg

Re: Project 2.

Posted: Thu Jul 16, 2026 9:20 pm
by In the Shed
EK283 wrote: Thu Jul 16, 2026 6:38 pm What size is the exhaust Brett ?

Come to Sydney, that will cure your traffic anxiety anywhere else !

Greg

Was going to ask the same, have you increased exhaust diameter Brett?