Posted: Fri Aug 21, 2009 9:46 pm
Nah, I'm talking about the one thats runs across the rear end of the auto hump on the inside of the cabin floor and is rivetted in with about 4 rivets each side.
Page 2 of 2
Posted: Sat Aug 22, 2009 6:49 am
that's what i'm talking about aswell, instead of the box section that runs around the underside of the floor hump for some reason they stuck it on the inside, i get the impression it's an afterthought
Posted: Sat Aug 22, 2009 8:16 am
I'd say it's like that so there is room for the auto? Trevratbox wrote:that's what i'm talking about aswell, instead of the box section that runs around the underside of the floor hump for some reason they stuck it on the inside, i get the impression it's an afterthought
.Posted: Sat Aug 22, 2009 1:21 pm
Ok, know what you mean now rat,and yep, I'd say thats put on top of the floor for room for the auto as you said Trev.
Posted: Sat Aug 22, 2009 7:28 pm
No guarantee that the carpet will fit properly anyway, I got carpet for the HK and it was too big (lose), and it is a stock floor, TrevDevilrod wrote: Be careful making your own tunnel that its dimensions are the same as an auto hump, otherwise your cost cutting will bite you when it comes to the carpet costs....
.Posted: Sat Aug 22, 2009 7:46 pm
i got carpet for my hz as well
miles to loose looks like crap
bayswater carpets here in perth...
miles to loose looks like crap
bayswater carpets here in perth...
Posted: Sun Aug 23, 2009 8:47 pm
Well if you buy from Knox Motor Trimmers you wont have any problems! Seems their floorpan they use for a mold is still the right shape.Trev wrote:No guarantee that the carpet will fit properly anyway, I got carpet for the HK and it was too big (lose), and it is a stock floor, Trev
Posted: Sun Aug 23, 2009 9:40 pm
Yep - Knox are the go , the only prob I had (and Devilrod too by the look) is that they dont go up under the dash far enough so you need to get an extra bit to go across the firewall
Posted: Sun Aug 23, 2009 9:49 pm
I'll third Knox 
Posted: Mon Aug 24, 2009 12:36 am
vintageholden, if you do wanna buy one i got one (perth).
We paid $170 for it. It was around $60-70 for shipping. Size i think, more than weight.
But $100 its yours. Its got a little cut out of the front right hand corner about 2inches long. Piece of piss to fix. Cant put up a photo if ya want.
Brodie
We paid $170 for it. It was around $60-70 for shipping. Size i think, more than weight.
But $100 its yours. Its got a little cut out of the front right hand corner about 2inches long. Piece of piss to fix. Cant put up a photo if ya want.
Brodie
Posted: Mon Aug 24, 2009 4:16 am
Exactly where I got it fromDevilrod wrote:Well if you buy from Knox Motor Trimmers you wont have any problems! Seems their floorpan they use for a mold is still the right shape.Trev wrote:No guarantee that the carpet will fit properly anyway, I got carpet for the HK and it was too big (lose), and it is a stock floor, Trev
Posted: Mon Aug 24, 2009 12:56 pm
Really! Thats the first one I've heard out of over a dozen or so that wasn't right.Trev wrote:Exactly where I got it from
Mine I reworked to remove the molding for the brace and that was it. Blacky I reckon if you put the original sound proofing back on the firewall it would solve that issue, I just forgot to allow for it once the heater was on
Posted: Mon Aug 24, 2009 5:13 pm
There's a brace, oh well not on mine.FB MAD wrote:I can give you the approx dimensions of the EK Auto hump if you want to make your own.
The original hump has an annoying brace about 2 inches high that runs over the top about 1/3rd ( 1/4 ?? ) way back from the rear and is rivetted to the floor/hump/under floor brace.
I don't think there is a real need for this brace personally but if you feel there should be one there you could make one that does the same and is a lot less intrusive.
Posted: Mon Aug 24, 2009 7:45 pm
photo sounds goodBrodie wrote:vintageholden, if you do wanna buy one i got one (perth).
We paid $170 for it. It was around $60-70 for shipping. Size i think, more than weight.
But $100 its yours. Its got a little cut out of the front right hand corner about 2inches long. Piece of piss to fix. Cant put up a photo if ya want.
Brodie
want to trade anything i,m a bit short of cash for a while
Posted: Tue Aug 25, 2009 1:08 am
pm sent