Page 2 of 2
Re: November 3rd , event #2
Posted: Fri Nov 01, 2013 5:53 pm
by EKDV8
hi! blacky ive got a hadfield front crossmember that needs some assembly i could drag that along

Re: November 3rd , event #2
Posted: Fri Nov 01, 2013 7:29 pm
by Blacky
Yeah , bring ém , we need SOMETHING to do .
Re: November 3rd , event #2
Posted: Sat Nov 02, 2013 9:24 pm
by Blacky
We will be kicking off at around 9 am and winding things up around 2pm , address is cnr Lower Park Rd and Kelvin Rd , Maddington
Look for the FB/EK Club banner on the fence next to the gate in Lower Park Rd

Re: November 3rd , event #2
Posted: Sat Nov 02, 2013 10:56 pm
by Woody01
Busy in the morning, so don't think I'll be able to make it by 2pm. Have fun fellas
Re: November 3rd , event #2
Posted: Sun Nov 03, 2013 10:30 pm
by Woody01
Any pics?

Re: November 3rd , event #2
Posted: Sun Nov 03, 2013 11:07 pm
by WesternWagon
Re: November 3rd , event #2
Posted: Sun Nov 03, 2013 11:42 pm
by Blacky
Brakes and carby rebuild bench - note the factory shocks that came out of Gazzas ute , no wonder they were buggered !

Less talk , more work you bludgers !!!!!
Jamie and old Pete talking old motorcycles

Trevors FB getting some wiring sorted out.

Re: November 3rd , event #2
Posted: Mon Nov 04, 2013 12:45 am
by Woody01

looks like a good day! Hopefully I can make the next spanner day!
Re: November 3rd , event #2
Posted: Mon Nov 04, 2013 12:21 pm
by NoMAD
Looks good boys... sorry i couldnt make it in the end had a bit of a family emergency to deal with...
what times the Armadale auto parts kick off? got a game at 11:30 i have to be at in willeton so going to try and make it down before hand?
Cheers
Nathan
Re: November 3rd , event #2
Posted: Thu Nov 07, 2013 1:30 pm
by Marko
Re: November 3rd , event #2
Posted: Thu Nov 07, 2013 10:20 pm
by 60Special
Hi Marko,
Picking up a Panelvan myself this weekend. Will be interesting to see what you've done to yours.
Trevor J.
Re: November 3rd , event #2
Posted: Fri Nov 08, 2013 1:28 pm
by Marko
Hi Trevor,
Excellent, another panel van saved, well done.
Fortunately mine is in excellent condition body wise, I have taken it back to bare metal in and out, done a few minor repairs - bottom of guards and rear quarters but other than that it will look very original. The panel beater wanted to customise the inside of the rear but because it is in such good nic, I wanted to show it off as original. It is all engineer approved and mod plated for the v8, just need to finish the body work and put her back together. Can't wait to see how the new 308 goes.
One day I will make it to Perth and catch up with fellow club members.
Cheers Mark

Re: November 3rd , event #2
Posted: Tue Nov 12, 2013 10:37 pm
by (AUST)Mod
Great day guys thanks for the barbie Blacky!