fbekholden.com

Sorry maybe I'm missing something - is the hole much bigger than original? if yes then yes it needs to be closed in more but water getting into the plenum chamber should just drain away so making that fully water proofed is key for sure or yes feet will get wet.

Errol62 wrote: Tue Nov 05, 2019 7:41 am Thanks for your input Rob. I don't know.

Sent from my SM-A705YN using Tapatalk

Thanks everyone. Normal antenna base size hole in cover and same size directly below in plenum panel. Imagine the installer would have used a hole saw from the top. There is about 7mm separation between the two panels near the window. The main problem is where the lower panel dips to form the drain channel. The aerial mount isn't designed to cope with this and the large gap will be difficult to seal. I could possibly fill the lower hole and mount aerial to top panel if there is enough gap. I actually like the look. Otherwise I'll just fill it all in and mount on the guard. That is where I've had them before and never been a problem. Possibly even go hidden antenna to save holeing guard I don't know ffs.

Sent from my SM-A705YN using Tapatalk

Think I would fill the hole with the panel screwed down to help prevent distortion.

Sent from my SM-A705YN using Tapatalk

youre overthinking it , mount antenna, big bead of silastic from underneath - job done.

Thats how mine is Clay as the aerial base has to come into the cabin for connection - Mine hadn't leaked in it's 50 years so if you re-installed with a bit of mastic I couldn't see any issues - put it in the guard you still need come through the firewall - If I get a chance I'll pull mine apart and take some pics how it's fitted if that would help?

Errol62 wrote: Tue Nov 05, 2019 10:43 am Thanks everyone. Normal antenna base size hole in cover and same size directly below in plenum panel. Imagine the installer would have used a hole saw from the top. There is about 7mm separation between the two panels near the window. The main problem is where the lower panel dips to form the drain channel. The aerial mount isn't designed to cope with this and the large gap will be difficult to seal. I could possibly fill the lower hole and mount aerial to top panel if there is enough gap. I actually like the look. Otherwise I'll just fill it all in and mount on the guard. That is where I've had them before and never been a problem. Possibly even go hidden antenna to save holeing guard I don't know ffs.

Sent from my SM-A705YN using Tapatalk

Thanks Rob. Don't go out of your way mate.

Sent from my SM-A705YN using Tapatalk

Bloody hole had to go. Used compressed air like Greg suggested.

Sent from my SM-A705YN using Tapatalk

I had a look at mine yesterday - without pulling it apart there seam to be a spacer of some kind between the cowl and the plenum chamber which would add to the seal but looks like you've moved on

Thanks Rob. Yes mine had that. It was doing my head in so going in the guard or hidden now.


FB ute fixer upper, EK van on rotisserie

Ready for filler

Sent from my SM-A705YN using Tapatalk

this is great work. got the settings and technique nailed.

Too kind

Sent from my SM-A705YN using Tapatalk

Looks good Clay Is that a couple of pinholes that you repaired to the right of the “ringworm”


Sent from my iPhone using Tapatalk

New phone sucks

Sent from my SM-A705YN using Tapatalk

Mirror mount or something screwed there John. Right through to cabin they were.

Sent from my SM-A705YN using Tapatalk