Seat belts

Trev · Post by **Trev** » Wed May 06, 2009 6:13 pm

Has anyone here used belts from "Seat belt solutions" ?

I want to get some new inertia real belts for the wagon but don't want to use black ones from Autobarn.

Any other suggestions? Trev

.

Aussy Edo · Post by **Aussy Edo** » Wed May 06, 2009 8:22 pm

Hey Trev,There is a mob in melbourne that do all colours,i got my lap seat belt for the back seat from them,i will have a look and get ya the name of them tomorrow

cheerz
Edo

NoMAD · Post by **NoMAD** » Wed May 06, 2009 8:38 pm

Stamp's hot rod seatbelts, i think he's details are in my FB EK thread somewhere over that side on the country does good one, if you supply them he'll even reweb old style buckles into them.

Cheers
NoMAD

Trev · Post by **Trev** » Thu May 07, 2009 4:07 am

Edo, a number would be great thanks.

NoMAD, thanks for the info

.

Now, anyone got a set (6) of old style belt buckles they want to sell me? Trev

.

Craig · Post by **Craig** » Thu May 07, 2009 7:04 am

Hi Trev
Hemco do coloured belts
http://www.hemco.com.au/seatbelts.html

I havent used them though

As far as rewebbing goes I thought that Seat Belt Solutions were the only ones in OZ that can LEAGALY reweb belts complete with ADR tag but only for the webbing not for the buckles dut I could be wrong again

FB MAD · Post by **FB MAD** » Thu May 07, 2009 9:04 am

I've just bought a set of black lap sash belts from Hemco

for my old bomb and just got them in the mail yesterday.They are made in Australia to Australian design standards.

Hemco are based in Ballarat.

Belts for six seating positions all up was $460 posted to me with all bolts,anchor plates etc to fit.

That price was for black ones as I'm not worried about matching colours in my old beast.

Coloured ones are a bit dearer.

Haven't fitted them yet but they look OK.

Same type belts from Seatbelt Solutions was going to be near $700.

thropzed · Post by **thropzed** » Thu May 07, 2009 9:35 am

I just fitted 5 black lap sash belts from Repco. Cost $400 bucks and $6 bucks each for the mounting plates and cost me $127 to have the whole Wagoon complianced,(Disc conversion, Red Motor, Trimatic and Seat Belts).
Cheers Theo Z.........................

Cal · Post by **Cal** » Thu May 07, 2009 11:50 am

I'm waiting on a quote from my mechanic to supply and fit 4 lap-shash seat belts to the EK.

Judging by the prices here, it aint going to be cheap

NoMAD · Post by **NoMAD** » Thu May 07, 2009 12:04 pm

FB MAD wrote:I've just bought a set of black lap sash belts from Hemco for my old bomb and just got them in the mail yesterday.They are made in Australia to Australian design standards.

Hemco are based in Ballarat.

Belts for six seating positions all up was $460 posted to me with all bolts,anchor plates etc to fit.

That price was for black ones as I'm not worried about matching colours in my old beast.

Coloured ones are a bit dearer.

Haven't fitted them yet but they look OK.

Same type belts from Seatbelt Solutions was going to be near $700.

Thants a dam good price if there inertia? most are around the 700 mark wheni priced up 6 (4 inertia, 2 lap)

cheers
NoMAD

Trev · Post by **Trev** » Thu May 07, 2009 4:28 pm

Rang Stamp's today and 4 inertia and 2 lap belts will cost about $700 in the color I want.
He only uses the black connectors because they are the only ones that are Australian standard compliance, because I asked about the chrome air plane style and he doesn't use them because they fail the Aus standards test, Trev

.

Trev · Post by **Trev** » Thu May 07, 2009 4:31 pm

FB MAD wrote: Belts for six seating positions all up was $460 posted to me with all bolts,anchor plates etc to fit.

That price was for black ones as I'm not worried about matching colours in my old beast.

Terry, are they inertia belts or fixed? Trev

.

FB MAD · Post by **FB MAD** » Thu May 07, 2009 6:48 pm

No not inertia reel belts, lap sash belts.Its only for my daily driver so lap sash will do me.Will be putting inertia ones in the V8 EK.

Inertia reel was a bit dearer but I think they were still cheaper than setbelt solutions prices.

Inertia reel belts are available from Hemco as well.There are prices on their website, Craig put up a link

to their website.

Aussy Edo · Post by **Aussy Edo** » Thu May 07, 2009 8:03 pm

hi Trev,like craig and terry said

Hemco in Ballarat,i just got black to match the rest and it was easy with everything supplied.ph 03 5334 1213.

cheerz
Edo

BILLY BLACKARROW · Post by **BILLY BLACKARROW** » Thu May 07, 2009 10:20 pm

The Hemco---- seat belts did you have to say they were going in fb/ek or dosen't it mater what spec did you have to give them .want 4 intia 1 lap
BILLY

puddes · Post by **puddes** » Fri May 08, 2009 1:44 am

Does anyone know of where one might start looking if they wanted the air plane style Trev was talking about?

PS - I also took NoMADs advice and rang STAMPS this arvo. They are currently running on about 4 weeks turnaround time compared to around 12 weeks if anyone is interested in heading their way.

fbekholden.com

Seat belts

Seat belts

seatbelts

seat belts

POST SUBJECT