Red Rattler Revamp

[Blacky]

Another step closer -




Cover it tomorrow night



Sent from my iPhone using Tapatalk

[FireKraka]

Like it very neat.

[FbSTDwagon]

Drink holders! What a treat!

[Blacky]

Like it very neat.

You best get your eyes checked mate - its pretty rugged

hopefully the foam and vinyl will hide the lumps and bumps ........

[Errol62]

Keeping with the klacby kitch kustom theme...

Sent from my SM-G781B using Tapatalk

[FireKraka]

Mate rugged always looks great with a bit of paint or carpet covering it

[Blacky]

Better get some thicker carpet then

Another night in the shed - the fact that the gearstick was offset was messing with my CDO so I set to fixing it .
Took the stick off and made an adapter piece to shift it over the required amount , started with a bit of 75x75x8 angle and cut a bit off

Then drilled it out and made it fit

Rough enough - you won’t see it once it’s all together


Went to fit it up , gave meself an uppercut and made another one - forgot that the top needs to be drilled and tapped not clearance holes



Sent from my iPhone using Tapatalk

[Blacky]

Dickhead ……..

Fitted the new one to the shifter handle and bolted it up to the gearbox



Now it sits in the centre where it should be , finished the night off with sussing out how to mount the thing without having visible screws then went inside for a rum



Sent from my iPhone using Tapatalk

[FireKraka]

[Harv]

Went to fit it up , gave meself an uppercut and made another one - forgot that the top needs to be drilled and tapped not clearance holes

I would have spent at least 20 minutes wondering if I could bodgy up that top hole with a Helicoil before I spent 10 minutes drilling another bit of iron.

Cheers,
Harv

[Blacky]

Went to fit it up , gave meself an uppercut and made another one - forgot that the top needs to be drilled and tapped not clearance holes

I would have spent at least 20 minutes wondering if I could bodgy up that top hole with a Helicoil before I spent 10 minutes drilling another bit of iron.

Cheers,
Harv

dont worry, i had similar thoughts the fact that all the bits were still on the bench ready to go made the decision a bit easier

[Blacky]

Made a start - using aerosol trim glue , squirt and stick




Sides were easy with the foam, will see how we go with the vinyl…..
Did the faces then it was time to have lunch and let the glue go off for a while




Sent from my iPhone using Tapatalk

[Blacky]

And done -




Sent from my iPhone using Tapatalk

[FbSTDwagon]

Went to fit it up , gave meself an uppercut and made another one - forgot that the top needs to be drilled and tapped not clearance holes

I would have spent at least 20 minutes wondering if I could bodgy up that top hole with a Helicoil before I spent 10 minutes drilling another bit of iron.

Cheers,
Harv

Only 20mins? I spend an hours thinking my way into a 10 minute fix. No wonder I don’t go anywhere but my shed

[FireKraka]

Cool as Blacky and don’t worry Drew my workshop is my happy place, after years spent in ships engine rooms with ear muffs on I really happy in my own head.