Clay’s Wedgewood Blue FB Ute
Re: Clay’s Wedgewood Blue FB Ute
Clay,
(Warning. This post may cause revulsion.)
Rather than going to all the trouble of pulling the camshaft out . . . couldn't you weld an old pushrod to the lifter body and extract the lifter with the pushrod? Desperate times, desperate measures . . .
Or a slightly more civilized approach: remove the interior circlip and extract the plunger from the lifter body. Then you might be able to get a lifter removal tool to grip inside the lifter body.
Rob
(Warning. This post may cause revulsion.)
Rather than going to all the trouble of pulling the camshaft out . . . couldn't you weld an old pushrod to the lifter body and extract the lifter with the pushrod? Desperate times, desperate measures . . .
Or a slightly more civilized approach: remove the interior circlip and extract the plunger from the lifter body. Then you might be able to get a lifter removal tool to grip inside the lifter body.
Rob
Re: Clay’s Wedgewood Blue FB Ute
i had an engine with bad lifters that would not come out, sold the car with the buyer knowing the lifters needed doing and that's what the buyer did welded some rod to lifters and slide hammered them outardiesse wrote: ↑Sun Sep 17, 2023 7:28 pm Clay,
(Warning. This post may cause revulsion.)
Rather than going to all the trouble of pulling the camshaft out . . . couldn't you weld an old pushrod to the lifter body and extract the lifter with the pushrod? Desperate times, desperate measures . . .
Or a slightly more civilized approach: remove the interior circlip and extract the plunger from the lifter body. Then you might be able to get a lifter removal tool to grip inside the lifter body.
Rob
sometimes yor just better off shitting in yor hands and clapping
W.S.C.C.A
Woodstock chapter
W.S.C.C.A
Woodstock chapter
Re: Clay’s Wedgewood Blue FB Ute
I’ve got the circlip, pushrod seat and inner piston out Rob. Only bit left is the outer shell. I thought about welding, and slide hammer, but worried about damaging the lifter bore if the lifter is actually out of shape at the base. So cam can come out.
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Clay’s Wedgewood Blue FB Ute
Lifter damaged and can' t pull out through its bore, then your camshaft lobe is probably damaged as well.
New cam and lifters !!!!
Greg
New cam and lifters !!!!
Greg
So many cars so little time!
Re: Clay’s Wedgewood Blue FB Ute
Looks that way Greg. We’ll see. If so I will look for something with peak torque around 2700rpm or less, which is what it is pulling at 100kmh.
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Clay’s Wedgewood Blue FB Ute
Be aware that you can’t get the oil pump out with the engine in the car Clay., you can get it out far enough to get the cam out but be super careful with the gasket or you will have to pull the motor.. also the timing cover/ sump is a real bitch to do in the car.. along with trying to get your dud lifter out without dropping it in the sump it may be easier to pull the motor ![](http://emoji.tapatalk-cdn.com/emoji848.png)
Sent from my iPhone using Tapatalk
![](http://emoji.tapatalk-cdn.com/emoji848.png)
Sent from my iPhone using Tapatalk
Re: Clay’s Wedgewood Blue FB Ute
Hmm.....
That'll mean carbies off. Thanks for heads up Glen.
Sent from my SM-G781B using Tapatalk
That'll mean carbies off. Thanks for heads up Glen.
Sent from my SM-G781B using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Clay’s Wedgewood Blue FB Ute
The rocker arm had eventually jumped off the pushrod, causing exhaust to vent out the rear carb, which sounded raucous to say the least. Subsequently discovered the filter had blown off!![Image](//uploads.tapatalk-cdn.com/20230922/de557d469f1f2abcce9ed1ec28900a6e.jpg)
Sent from my SM-G781B using Tapatalk
![Image](http://uploads.tapatalk-cdn.com/20230922/de557d469f1f2abcce9ed1ec28900a6e.jpg)
Sent from my SM-G781B using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Clay’s Wedgewood Blue FB Ute
All but the back lifter came out easily. I developed a special tool to give the offender a good hook.![Image](//uploads.tapatalk-cdn.com/20230922/4ef315310f8fd1c9a20c70b15fd02131.jpg)
Got bottom of lifter 50% up the bore. Very stiff to rotate. So pushed it back down a bit, and will see if I can do the cam in car.
Sent from my SM-G781B using Tapatalk
![Image](http://uploads.tapatalk-cdn.com/20230922/4ef315310f8fd1c9a20c70b15fd02131.jpg)
Got bottom of lifter 50% up the bore. Very stiff to rotate. So pushed it back down a bit, and will see if I can do the cam in car.
Sent from my SM-G781B using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Clay’s Wedgewood Blue FB Ute
Try getting the oil pump oil
Pump out mate … unless you motor is 10 mm further the the passenger side you have to cut out some frame
Sent from my iPhone using Tapatalk
Pump out mate … unless you motor is 10 mm further the the passenger side you have to cut out some frame
Sent from my iPhone using Tapatalk
Re: Clay’s Wedgewood Blue FB Ute
To get the lifter out I put a 3/8 nut in the lifter and the put the cirlip back in and use a bit of threaded rod down through the pushrod hole and pull it out from the top… plan b Was going to be a broomstick wish a rare earth magnet on the end after the cam is out![](http://emoji.tapatalk-cdn.com/emoji848.png)
Sent from my iPhone using Tapatalk
![](http://emoji.tapatalk-cdn.com/emoji848.png)
Sent from my iPhone using Tapatalk
Re: Clay’s Wedgewood Blue FB Ute
ingenious Clay- up there with the greats of specialist tooling (ie BFH, BFS...) good luck.
cheers melly
cheers melly
- funkyscooter
- Posts: 571
- Joined: Wed Aug 16, 2017 8:12 am
- State: NSW
- Location: Sydney
Re: Clay’s Wedgewood Blue FB Ute
Hey Clay - saw you are selling a set of SU's over on facebook. Is the triple dream over - or is there another plan? Webbers?
Scott
(Not so rusty) Ol' Rusty - FB/EK Sedan
(Not so rusty) Ol' Rusty - FB/EK Sedan
Re: Clay’s Wedgewood Blue FB Ute
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: Clay’s Wedgewood Blue FB Ute
Just some surplus bits Scott. I’m sticking with the current setup. Fingers crossed cam is ok. If not I’ll get one custom ground to suit the gearing, by one of Gledge’s contacts.
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie