Horn contacts

[Blacky]

Hi there, Do we still have a couple of those contacts that I could buy? My EK's horn does not work and I suspect that the switch/contact area is responsible.

I still haven't finished making them .......

[FBeing]

I'll take a set when you get around to making them too Blacky if that's cool?

[Blacky]

I had 20 of the contacts machined up so forum members and club members get first option , if there's any left they will be offered on Bookface - I may have to get more done I think , plenty of people chasing them ......

[FBeing]

I haven't been on the forum for donkeys, my horn decided it didn't want to work today. I suspect it a contact issue! Logged on and saw your post... from... some time ago lol

If not enough that's fine, not on FaceAche so that's no go for me

[avm]

Another thing - if there are parts of the horn mechanism that can be 3D printed, then I'd be happy to give that a try. All that I would probably need is for someone to either lend to me a sample of the part to be printed (even if it's cracked or worn), or for someone to supply me information about the geometry (e.g. scale drawings). For example (and a highly fictitious example): If the part consists of a plastic ring having 75mm outer diameter, 58mm inner diameter, total thickness 3.2mm with a 4mm square north cut out of the outer edge at the 12-o'clock position, then that's the sort of thing I should be able to model and print for testing.

[Blacky]

Another thing - if there are parts of the horn mechanism that can be 3D printed, then I'd be happy to give that a try. All that I would probably need is for someone to either lend to me a sample of the part to be printed (even if it's cracked or worn), or for someone to supply me information about the geometry (e.g. scale drawings). For example (and a highly fictitious example): If the part consists of a plastic ring having 75mm outer diameter, 58mm inner diameter, total thickness 3.2mm with a 4mm square north cut out of the outer edge at the 12-o'clock position, then that's the sort of thing I should be able to model and print for testing.

I'm surprised more bits aren't 3D printed to be honest , the FB/EK chairs we raffled at the 2018 Nationals had some 3D printed parts in them

[motorhead]

Putting my hand up 100% for a set of horn contacts, ready with payment when requested.
I don't have a headlight switch or original button or bezel either. Marty

[Blacky]

Putting my hand up 100% for a set of horn contacts, ready with payment when requested.
I don't have a headlight switch or original button or bezel either. Marty

Welcome to the forum Marty,

Headlight switches can be bought new , I have a couple here or you can get them from Rare Spares

[In the Shed]

Blacky, I think there are a queue of people waiting outside your shed for horn contacts……………… no pressure

[Blacky]

Blacky, I think there are a queue of people waiting outside your shed for horn contacts……………… no pressure

yeah i may need to move this up the list - funny part is I got a couple from Dudleys yard at Nuriootpa nats so I dont actually need any for myself any more .......

[Errol62]

You mean the brissy boys didn’t rat them all by then?


FB ute fixer upper, EK van on rotisserie

[Blacky]

You mean the brissy boys didn’t rat them all by then?

They got most of them but I still managed to find a few

[Blacky]

OK kids - they are FINALLY ready

Not by me though - I was talking to a bloke in Perth about having sunvisor ends made and I mentioned to him that I was partway through making these things and he said that he would be happy to make them so I helped him out with a couple of things and now they are ready for sale.

His name is Richard and he owns a company called Billetworks, their main gig is building collapsible steering columns for earlies but he also makes lots of FX/FJ bits including hubcaps, FX grille badges , grey motor harmonic balancer removal and installation tools , etc etc .

Their number is 08 9309 2080 and the contacts are $75 including a new bush to fit into the steering wheel.

[Blacky]

And here’s a picture



Sent from my iPhone using Tapatalk

[BS]

Good stuff blacky


Sent from my iPhone using Tapatalk