Hidden wiper motor

If it doesn't fit below then post here and see if another FB EK fanatic can help you out.

Moderators: reidy, Blacky

Post Reply
Blacky
Posts: 12809
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: Hidden wiper motor

Post by Blacky »

bump for Gazza
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Top
User avatar
WesternWagon
Posts: 966
Joined: Wed Jul 07, 2010 6:33 pm
State: WA
Location: Mandura WA

Re: Hidden wiper motor

Post by WesternWagon »

Cheers mate


Sent from my iPhone using Tapatalk
Member : Holden Car Club WA.
:ASRF Member
: Secretary FB/EK holden Club of WA.
Top
mr48215
Posts: 4
Joined: Fri Jun 10, 2011 9:49 pm
State: VIC
Location: Reservoir

Re: Hidden wiper motor

Post by mr48215 »

Be aware that you can use use a Preslite VN wiper motor if you want 2 speeds. It bolts straight to your mounting plate but you must use the long drive arm see picture. You can't use early Holden wiper switches as they are earthed switched as the VN Motor is power switched. The VN motor allows you to use the Holden column switch and add intermittent delay. You can use the switch 75228-03BX shown earlier in this thread for dash switch for the VN Motor.
Attachments
EK VN Wiper Casting Diff.jpg
EK VN Wiper Casting Diff.jpg (594.09 KiB) Viewed 662 times
Top
User avatar
Errol62
Posts: 10291
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: Hidden wiper motor

Post by Errol62 »

More good info. BA fraud also and they are trico brand.

Sent from my SM-G781B using Tapatalk

getting my FB ute on the road
EK van on rotisserie
Top
Blacky
Posts: 12809
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: Hidden wiper motor

Post by Blacky »

mr48215 wrote:Be aware that you can use use a Preslite VN wiper motor if you want 2 speeds. It bolts straight to your mounting plate but you must use the long drive arm see picture. You can't use early Holden wiper switches as they are earthed switched as the VN Motor is power switched. The VN motor allows you to use the Holden column switch and add intermittent delay. You can use the switch 75228-03BX shown earlier in this thread for dash switch for the VN Motor.
That’s the motor I used in the conversion above mate


Sent from my iPhone using Tapatalk
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Top
Post Reply

Return to “General sharing advice and experience”